On Wednesday, October 30, 2019 4:05:45 PM CET Mika Westerberg wrote:
> Valerio and others reported that commit 84c8b58ed3ad ("ACPI / hotplug /
> PCI: Don't scan bridges managed by native hotplug") prevents some recent
> LG and HP laptops from booting with endless loop of:
>
> [ 26.237796] ACPI Error: No handler or method for GPE 08, disabling event (20190215/evgpe-835)
> [ 26.238699] ACPI Error: No handler or method for GPE 09, disabling event (20190215/evgpe-835)
> [ 26.239306] ACPI Error: No handler or method for GPE 0A, disabling event (20190215/evgpe-835)
> ...
>
> What seems to happen is that during boot, after the initial PCI
> enumeration when EC is enabled the platform triggers ACPI Notify() to
> one of the root ports. The root port itself looks like this:
>
> [ 0.723757] pci 0000:00:1b.0: PCI bridge to [bus 02-3a]
> [ 0.723765] pci 0000:00:1b.0: bridge window [mem 0xc4000000-0xda0fffff]
> [ 0.723773] pci 0000:00:1b.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
>
> The BIOS has configured the root port so that it does not have I/O
> bridge window.
>
> Now when the ACPI Notify() is triggered ACPI hotplug handler calls
> acpiphp_native_scan_bridge() for each non-hotplug bridge (as this system
> is using native PCIe hotplug) and pci_assign_unassigned_bridge_resources()
> to allocate resources.
>
> The device connected to the root port is a PCIe switch (Thunderbolt
> controller) with two hotplug downstream ports. Because of the hotplug
> ports __pci_bus_size_bridges() tries to add "additional I/O" of 256
> bytes to each (DEFAULT_HOTPLUG_IO_SIZE). This gets further aligned to 4k
> as that's the minimum I/O window size so each hotplug port gets 4k I/O
> window and the same happens for the root port (which is also hotplug
> port). This means 3 * 4k = 12k I/O window.
>
> Because of this pci_assign_unassigned_bridge_resources() ends up opening
> a I/O bridge window for the root port at first available I/O address
> which seems to be in range 0x1000 - 0x3fff. Normally this range is used
> for ACPI stuff such as GPE bits (below is part of /proc/ioports):
>
> 1800-1803 : ACPI PM1a_EVT_BLK
> 1804-1805 : ACPI PM1a_CNT_BLK
> 1808-180b : ACPI PM_TMR
> 1810-1815 : ACPI CPU throttle
> 1850-1850 : ACPI PM2_CNT_BLK
> 1854-1857 : pnp 00:05
> 1860-187f : ACPI GPE0_BLK
>
> However, when the ACPI Notify() happened this range was not yet reserved
> for ACPI/PNP (that happens later) so PCI gets it. It then starts writing
> to this range and accidentally stomps over GPE bits among other things
> causing the endless stream of messages about missing GPE handler.
>
> This problem does not happen if "pci=hpiosize=0" is passed in the kernel
> command line. The reason is that then the kernel does not try to
> allocate the additional 256 bytes for each hotplug port.
>
> Fix this by allocating resources directly below the non-hotplug bridges
> where a new device may appear as a result of ACPI Notify(). This avoids
> the hotplug bridges and prevents opening the additional I/O window.
>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=203617
> Fixes: 84c8b58ed3ad ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug")
> Cc: stable@xxxxxxxxxxxxxxx
> Reported-by: Valerio Passini <passini.valerio@xxxxxxxxx>
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
That should work:
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Bjorn, if you want me to take this, please let me know.
> ---
> I was able to reproduce this without access to the affected system by
> forcing ACPI core to send Notify() to the TBT root port like this:
>
> void acpi_notify_rp(void)
> {
> struct acpi_device *adev;
> acpi_handle handle;
>
> if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB.PCI0.RP17", &handle)))
> return;
>
> if (acpi_bus_get_device(handle, &adev))
> return;
>
> dev_info(&adev->dev, "queueing hotplug\n");
> acpiphp_hotplug_notify(adev, ACPI_NOTIFY_BUS_CHECK);
> }
>
> and calling it from acpi_init() directly after acpi_ec_init().
>
> drivers/pci/hotplug/acpiphp_glue.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
> index e4c46637f32f..b3869951c0eb 100644
> --- a/drivers/pci/hotplug/acpiphp_glue.c
> +++ b/drivers/pci/hotplug/acpiphp_glue.c
> @@ -449,8 +449,15 @@ static void acpiphp_native_scan_bridge(struct pci_dev *bridge)
>
> /* Scan non-hotplug bridges that need to be reconfigured */
> for_each_pci_bridge(dev, bus) {
> - if (!hotplug_is_native(dev))
> - max = pci_scan_bridge(bus, dev, max, 1);
> + if (hotplug_is_native(dev))
> + continue;
> +
> + max = pci_scan_bridge(bus, dev, max, 1);
> + if (dev->subordinate) {
> + pcibios_resource_survey_bus(dev->subordinate);
> + pci_bus_size_bridges(dev->subordinate);
> + pci_bus_assign_resources(dev->subordinate);
> + }
> }
> }
>
> @@ -480,7 +487,6 @@ static void enable_slot(struct acpiphp_slot *slot, bool bridge)
> if (PCI_SLOT(dev->devfn) == slot->device)
> acpiphp_native_scan_bridge(dev);
> }
> - pci_assign_unassigned_bridge_resources(bus->self);
> } else {
> LIST_HEAD(add_list);
> int max, pass;
>
