PCI device function not being enumerated [Was: PCMCIA not working on Panasonic Toughbook CF-29]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On the basis of the additional information (thanks), there might be a
more specific path to investigate: It is that the PCI code does not
enumerate the second cardbus bridge PCI function in the more recent 4.19
kernel compared to the anvient (and working) 2.6 kernel.

Namely, only one CardBus bridge is recognized

...
06:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8b)
06:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 11)
06:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
...

instead of the two which really should be present:

...
06:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8b)
06:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8b)
06:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 11)
06:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
...

To the PCI folks: any idea on what may cause the second cardbus bridge PCI
device function to be missed? Are there any command line options the users
who reported this issue[*] may try?

As this isn't really a PCMCIA (16bit) issue, but a PCI enumeration issue,
this issue is outside my area of expertise.

Thanks,
	Dominik

[*] For more information, see this thread:
	https://lore.kernel.org/lkml/CAFjuqNi+knSb9WVQOahCVFyxsiqoGgwoM7Z1aqDBebNzp_-jYw@xxxxxxxxxxxxxx/



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux