[PATCH v2 12/25] PCI: v3-semi: Use pci_parse_request_of_pci_ranges()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert V3 host bridge to use the common
pci_parse_request_of_pci_ranges().

Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Andrew Murray <andrew.murray@xxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
v2:
- New patch

 drivers/pci/controller/pci-v3-semi.c | 35 +++++-----------------------
 1 file changed, 6 insertions(+), 29 deletions(-)

diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
index d219404bad92..96677520f6c1 100644
--- a/drivers/pci/controller/pci-v3-semi.c
+++ b/drivers/pci/controller/pci-v3-semi.c
@@ -241,10 +241,8 @@ struct v3_pci {
 	void __iomem *config_base;
 	struct pci_bus *bus;
 	u32 config_mem;
-	u32 io_mem;
 	u32 non_pre_mem;
 	u32 pre_mem;
-	phys_addr_t io_bus_addr;
 	phys_addr_t non_pre_bus_addr;
 	phys_addr_t pre_bus_addr;
 	struct regmap *map;
@@ -520,35 +518,22 @@ static int v3_integrator_init(struct v3_pci *v3)
 }

 static int v3_pci_setup_resource(struct v3_pci *v3,
-				 resource_size_t io_base,
 				 struct pci_host_bridge *host,
 				 struct resource_entry *win)
 {
 	struct device *dev = v3->dev;
 	struct resource *mem;
 	struct resource *io;
-	int ret;

 	switch (resource_type(win->res)) {
 	case IORESOURCE_IO:
 		io = win->res;
-		io->name = "V3 PCI I/O";
-		v3->io_mem = io_base;
-		v3->io_bus_addr = io->start - win->offset;
-		dev_dbg(dev, "I/O window %pR, bus addr %pap\n",
-			io, &v3->io_bus_addr);
-		ret = devm_pci_remap_iospace(dev, io, io_base);
-		if (ret) {
-			dev_warn(dev,
-				 "error %d: failed to map resource %pR\n",
-				 ret, io);
-			return ret;
-		}
+
 		/* Setup window 2 - PCI I/O */
-		writel(v3_addr_to_lb_base2(v3->io_mem) |
+		writel(v3_addr_to_lb_base2(pci_pio_to_address(io->start)) |
 		       V3_LB_BASE2_ENABLE,
 		       v3->base + V3_LB_BASE2);
-		writew(v3_addr_to_lb_map2(v3->io_bus_addr),
+		writew(v3_addr_to_lb_map2(io->start - win->offset),
 		       v3->base + V3_LB_MAP2);
 		break;
 	case IORESOURCE_MEM:
@@ -732,7 +717,6 @@ static int v3_pci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	resource_size_t io_base;
 	struct resource *regs;
 	struct resource_entry *win;
 	struct v3_pci *v3;
@@ -741,7 +725,6 @@ static int v3_pci_probe(struct platform_device *pdev)
 	u16 val;
 	int irq;
 	int ret;
-	LIST_HEAD(res);

 	host = pci_alloc_host_bridge(sizeof(*v3));
 	if (!host)
@@ -793,12 +776,7 @@ static int v3_pci_probe(struct platform_device *pdev)
 	if (IS_ERR(v3->config_base))
 		return PTR_ERR(v3->config_base);

-	ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &res,
-						    &io_base);
-	if (ret)
-		return ret;
-
-	ret = devm_request_pci_bus_resources(dev, &res);
+	ret = pci_parse_request_of_pci_ranges(dev, &host->windows, NULL);
 	if (ret)
 		return ret;

@@ -852,8 +830,8 @@ static int v3_pci_probe(struct platform_device *pdev)
 	writew(val, v3->base + V3_PCI_CMD);

 	/* Get the I/O and memory ranges from DT */
-	resource_list_for_each_entry(win, &res) {
-		ret = v3_pci_setup_resource(v3, io_base, host, win);
+	resource_list_for_each_entry(win, &host->windows) {
+		ret = v3_pci_setup_resource(v3, host, win);
 		if (ret) {
 			dev_err(dev, "error setting up resources\n");
 			return ret;
@@ -931,7 +909,6 @@ static int v3_pci_probe(struct platform_device *pdev)
 	val |= V3_SYSTEM_M_LOCK;
 	writew(val, v3->base + V3_SYSTEM);

-	list_splice_init(&res, &host->windows);
 	ret = pci_scan_root_bus_bridge(host);
 	if (ret) {
 		dev_err(dev, "failed to register host: %d\n", ret);
--
2.20.1



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux