Re: [PATCH v3] PCI/AER: Save and restore AER config state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 08, 2019 at 08:07:47AM +0000, Patel, Mayurkumar wrote:
> This patch provides AER config save and restore capabilities. After system
> 
> resume AER config registers settings are lost. Not restoring AER root error
> 
> command register bits on root port if they were set, disables generation
> 
> of an AER interrupt reported by function as described in PCIe spec r4.0,
> 
> sec 7.8.4.9. Moreover, AER config mask, severity and ECRC registers are
> 
> also required to maintain same state prior to system suspend to maintain
> 
> AER interrupts behavior.

This mail is broken since it has HTML part.
Use standard tool to send patches, i.e. git-send-email.

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux