On Tue, Sep 24, 2019 at 03:18:47PM +0100, Russell King - ARM Linux admin wrote: > On Mon, Sep 16, 2019 at 10:17:36AM +0800, Xiaowei Bao wrote: > > This patch set are for adding Mobiveil EP driver and adding PCIe Gen4 > > EP driver of NXP Layerscape platform. > > > > This patch set depends on: > > https://patchwork.kernel.org/project/linux-pci/list/?series=159139 > > > > Xiaowei Bao (6): > > PCI: mobiveil: Add the EP driver support > > dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape > > PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs > > PCI: mobiveil: Add workaround for unsupported request error > > arm64: dts: lx2160a: Add PCIe EP node > > misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device > > support > > > > .../bindings/pci/layerscape-pcie-gen4.txt | 28 +- > > MAINTAINERS | 3 + > > arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 56 ++ > > drivers/misc/pci_endpoint_test.c | 2 + > > drivers/pci/controller/mobiveil/Kconfig | 22 +- > > drivers/pci/controller/mobiveil/Makefile | 2 + > > .../controller/mobiveil/pcie-layerscape-gen4-ep.c | 169 ++++++ > > drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++ > > drivers/pci/controller/mobiveil/pcie-mobiveil.c | 99 +++- > > drivers/pci/controller/mobiveil/pcie-mobiveil.h | 72 +++ > > 10 files changed, 1009 insertions(+), 12 deletions(-) > > create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c > > create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c > > Hi, > > I've applied "PCI: mobiveil: Fix the CPU base address setup in inbound > window" and your patch set to 5.3, which seems to be able to detect the > PCIe card I have plugged in: > > layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges: > layerscape-pcie-gen4 3800000.pcie: MEM 0xa040000000..0xa07fffffff -> 0x40000000 > layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [bus 00-ff] > pci_bus 0000:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address > [0x40000000-0x7fffffff]) > pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400 > pci 0000:00:00.0: enabling Extended Tags > pci 0000:00:00.0: supports D1 D2 > pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:01:00.0: [15b3:6750] type 00 class 0x020000 > pci 0000:01:00.0: reg 0x10: [mem 0xa040000000-0xa0400fffff 64bit] > pci 0000:01:00.0: reg 0x18: [mem 0xa040800000-0xa040ffffff 64bit pref] > pci 0000:01:00.0: reg 0x30: [mem 0xa041000000-0xa0410fffff pref] > pci 0000:00:00.0: up support 3 enabled 0 > pci 0000:00:00.0: dn support 1 enabled 0 > pci 0000:00:00.0: BAR 9: assigned [mem 0xa040000000-0xa0407fffff 64bit pref] > pci 0000:00:00.0: BAR 8: assigned [mem 0xa040800000-0xa0409fffff] > pci 0000:01:00.0: BAR 2: assigned [mem 0xa040000000-0xa0407fffff 64bit pref] > pci 0000:01:00.0: BAR 0: assigned [mem 0xa040800000-0xa0408fffff 64bit] > pci 0000:01:00.0: BAR 6: assigned [mem 0xa040900000-0xa0409fffff pref] > pci 0000:00:00.0: PCI bridge to [bus 01-ff] > pci 0000:00:00.0: bridge window [mem 0xa040800000-0xa0409fffff] > pci 0000:00:00.0: bridge window [mem 0xa040000000-0xa0407fffff 64bit pref] > pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256pcieport 0000:00:00.0: PCIe capabilities: 0x13 > pcieport 0000:00:00.0: init_service_irqs: -19 > > However, a bit later in the kernel boot, I get: > > SError Interrupt on CPU1, code 0xbf000002 -- SError > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392 > Hardware name: SolidRun LX2160A COM express type 7 module (DT) > pstate: 60400085 (nZCv daIf +PAN -UAO) > pc : pci_generic_config_read+0xb0/0xc0 > lr : pci_generic_config_read+0x1c/0xc0 > sp : ffffff8010f9baf0 > x29: ffffff8010f9baf0 x28: ffffff8010d620a0 > x27: ffffff8010d79000 x26: ffffff8010d62000 > x25: ffffff8010cb06d4 x24: 0000000000000000 > x23: ffffff8010e499b8 x22: ffffff8010f9bbaf > x21: 0000000000000000 x20: ffffffe2eda11800 > x19: ffffff8010f62158 x18: ffffff8010bdede0 > x17: ffffff8010bdede8 x16: ffffff8010b96970 > x15: ffffffffffffffff x14: ffffffffff000000 > x13: ffffffffffffffff x12: 0000000000000030 > x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f > x9 : 2dff716475687163 x8 : ffffffffffffffff > x7 : fefefefefefefefe x6 : 0000000000000000 > x5 : 0000000000000000 x4 : ffffff8010f9bb6c > x3 : 0000000000000001 x2 : 0000000000000003 > x1 : 0000000000000000 x0 : 0000000000000000 > Kernel panic - not syncing: Asynchronous SError Interrupt > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392 > Hardware name: SolidRun LX2160A COM express type 7 module (DT) > Call trace: > dump_backtrace+0x0/0x120 > show_stack+0x14/0x1c > dump_stack+0x9c/0xc0 > panic+0x148/0x34c > print_tainted+0x0/0xa8 > arm64_serror_panic+0x74/0x80 > do_serror+0x8c/0x13c > el1_error+0xbc/0x160 > pci_generic_config_read+0xb0/0xc0 > pci_bus_read_config_byte+0x64/0x90 > pci_read_config_byte+0x40/0x48 > pci_assign_irq+0x34/0xc8 > pci_device_probe+0x28/0x148 > really_probe+0x1c4/0x2d0 > driver_probe_device+0x58/0xfc > device_driver_attach+0x68/0x70 > __driver_attach+0x94/0xdc > bus_for_each_dev+0x50/0xa0 > driver_attach+0x20/0x28 > bus_add_driver+0x14c/0x200 > driver_register+0x6c/0x124 > __pci_register_driver+0x48/0x50 > mlx4_init+0x154/0x180 > do_one_initcall+0x30/0x250 > kernel_init_freeable+0x23c/0x32c > kernel_init+0x10/0xfc > ret_from_fork+0x10/0x18 > SMP: stopping secondary CPUs > Kernel Offset: disabled > CPU features: 0x0002,21006008 > Memory Limit: none > > and there it dies. Any ideas? The failing access seems to be: pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); for the Mellanox Ethernet card. Presumably, being a PCIe ethernet card, it doesn't implement this register (just a guess), and aborts the PCI transaction, which is presumably triggering the above SError. Note that I've used this card with the Macchiatobin (Armada 8040) without issue. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
