The shadow offset scratchpad was moved to 0x2000-0x2010. Update the
location to get the correct shadow offset.
Cc: stable@xxxxxxxxxxxxxxx # v5.2+
Fixes: 6788958e ("PCI: vmd: Assign membar addresses from shadow registers")
Signed-off-by: Jon Derrick <jonathan.derrick@xxxxxxxxx>
---
drivers/pci/controller/vmd.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 2e4da3f51d6b..a35d3f3996d7 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -31,6 +31,9 @@
#define PCI_REG_VMLOCK 0x70
#define MB2_SHADOW_EN(vmlock) (vmlock & 0x2)
+#define MB2_SHADOW_OFFSET 0x2000
+#define MB2_SHADOW_SIZE 16
+
enum vmd_features {
/*
* Device may contain registers which hint the physical location of the
@@ -578,7 +581,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
u32 vmlock;
int ret;
- membar2_offset = 0x2018;
+ membar2_offset = MB2_SHADOW_OFFSET + MB2_SHADOW_SIZE;
ret = pci_read_config_dword(vmd->dev, PCI_REG_VMLOCK, &vmlock);
if (ret || vmlock == ~0)
return -ENODEV;
@@ -590,9 +593,9 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
if (!membar2)
return -ENOMEM;
offset[0] = vmd->dev->resource[VMD_MEMBAR1].start -
- readq(membar2 + 0x2008);
+ readq(membar2 + MB2_SHADOW_OFFSET);
offset[1] = vmd->dev->resource[VMD_MEMBAR2].start -
- readq(membar2 + 0x2010);
+ readq(membar2 + MB2_SHADOW_OFFSET + 8);
pci_iounmap(vmd->dev, membar2);
}
}
--
2.20.1
