Re: [PATCH v3 1/2] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 6, 2019 at 5:22 AM Chuan Hua, Lei
<chuanhua.lei@xxxxxxxxxxxxxxx> wrote:
[...]
> >> +examples:
> >> +  - |
> >> +    pcie10:pcie@d0e00000 {
> >> +      compatible = "intel,lgm-pcie";
> >> +      device_type = "pci";
> >> +      #address-cells = <3>;
> >> +      #size-cells = <2>;
> >> +      reg = <
> >> +            0xd0e00000 0x1000
> >> +            0xd2000000 0x800000
> >> +            0xd0a41000 0x1000
> >> +            >;
> >> +      reg-names = "dbi", "config", "app";
> >> +      linux,pci-domain = <0>;
> >> +      max-link-speed = <4>;
> >> +      bus-range = <0x00 0x08>;
> >> +      interrupt-parent = <&ioapic1>;
> >> +      interrupts = <67 1>;
> >> +      #interrupt-cells = <1>;
> >> +      interrupt-map-mask = <0 0 0 0x7>;
> >> +      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
> >> +                      <0 0 0 2 &ioapic1 28 1>,
> >> +                      <0 0 0 3 &ioapic1 29 1>,
> >> +                      <0 0 0 4 &ioapic1 30 1>;
> > is the "1" in the interrupts and interrupt-map properties IRQ_TYPE_EDGE_RISING?
> > you can use these macros in this example as well, see
> > Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml for
> > example
>
> No. 1 here means index from arch/x86/devicetree.c
>
> static struct of_ioapic_type of_ioapic_type[] =
> {
>      {
>          .out_type    = IRQ_TYPE_EDGE_RISING,
>          .trigger    = IOAPIC_EDGE,
>          .polarity    = 1,
>      },
>      {
>          .out_type    = IRQ_TYPE_LEVEL_LOW,
>          .trigger    = IOAPIC_LEVEL,
>          .polarity    = 0,
>      },
>      {
>          .out_type    = IRQ_TYPE_LEVEL_HIGH,
>          .trigger    = IOAPIC_LEVEL,
>          .polarity    = 1,
>      },
>      {
>          .out_type    = IRQ_TYPE_EDGE_FALLING,
>          .trigger    = IOAPIC_EDGE,
>          .polarity    = 0,
>      },
> };
>
> static int dt_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
>                    unsigned int nr_irqs, void *arg)
> {
>      struct irq_fwspec *fwspec = (struct irq_fwspec *)arg;
>      struct of_ioapic_type *it;
>      struct irq_alloc_info tmp;
>      int type_index;
>
>      if (WARN_ON(fwspec->param_count < 2))
>          return -EINVAL;
>
>      type_index = fwspec->param[1]; // index.
>      if (type_index >= ARRAY_SIZE(of_ioapic_type))
>          return -EINVAL;
>
> I would not see this definition is user-friendly. But it is how x86
> handles at the moment.
thank you for explaining this - I had no idea x86 is different from
all other platforms I know
the only upstream x86 .dts I could find
(arch/x86/platform/ce4100/falconfalls.dts) also uses the magic x86
numbers
so I'm fine with this until someone else knows a better solution


Martin



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux