PCIe defines two optional hotplug indicators: a Power indicator and an
Attention indicator. Both are controlled by the same register, and each
can be on, off or blinking. The current interfaces
(pciehp_green_led_{on,off,blink}() and pciehp_set_attention_status()) are
non-uniform and require two register writes in many cases where we could
do one.
This patchset introduces the new function pciehp_set_indicators(). It
allows one to set two indicators with a single register write. All
calls to previous interfaces (pciehp_green_led_* and
pciehp_set_attention_status()) are replaced with a new one. Thus,
the amount of duplicated code for setting indicators is reduced.
Changes in v4:
- Changed the inputs validation in pciehp_set_indicators()
- Moved PCI_EXP_SLTCTL_ATTN_IND_NONE, PCI_EXP_SLTCTL_PWR_IND_NONE
to drivers/pci/hotplug/pciehp.h and set to -1 for not interfering
with reserved values in the PCIe Base spec
- Added set_power_indicator define
Changes in v3:
- Changed pciehp_set_indicators() to work with existing
PCI_EXP_SLTCTL_* macros
- Reworked the inputs validation in pciehp_set_indicators()
- Removed pciehp_set_attention_status() and pciehp_green_led_*()
completely
Denis Efremov (4):
PCI: pciehp: Add pciehp_set_indicators() to jointly set LED indicators
PCI: pciehp: Switch LED indicators with a single write
PCI: pciehp: Remove pciehp_set_attention_status()
PCI: pciehp: Remove pciehp_green_led_{on,off,blink}()
drivers/pci/hotplug/pciehp.h | 12 ++++--
drivers/pci/hotplug/pciehp_core.c | 7 ++-
drivers/pci/hotplug/pciehp_ctrl.c | 26 +++++------
drivers/pci/hotplug/pciehp_hpc.c | 72 +++++++------------------------
include/uapi/linux/pci_regs.h | 1 +
5 files changed, 45 insertions(+), 73 deletions(-)
--
2.21.0
