> -----Original Message-----
> From: Andrew Murray <andrew.murray@xxxxxxx>
> Sent: 2019年8月27日 21:11
> To: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> Cc: bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> shawnguo@xxxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>; kishon@xxxxxx;
> lorenzo.pieralisi@xxxxxx; arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; M.h.
> Lian <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy
> Zang <roy.zang@xxxxxxx>; jingoohan1@xxxxxxxxx;
> gustavo.pimentel@xxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> Subject: Re: [PATCH v2 01/10] PCI: designware-ep: Add multiple PFs support
> for DWC
>
> On Fri, Aug 23, 2019 at 11:50:20PM +0000, Xiaowei Bao wrote:
> >
> >
> > > -----Original Message-----
> > > From: Andrew Murray <andrew.murray@xxxxxxx>
> > > Sent: 2019年8月23日 21:25
> > > To: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> > > Cc: bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> > > shawnguo@xxxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>; kishon@xxxxxx;
> > > lorenzo.pieralisi@xxxxxx; arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx;
> M.h.
> > > Lian <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy
> > > Zang <roy.zang@xxxxxxx>; jingoohan1@xxxxxxxxx;
> > > gustavo.pimentel@xxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx;
> > > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> > > Subject: Re: [PATCH v2 01/10] PCI: designware-ep: Add multiple PFs
> > > support for DWC
> > >
> > > On Thu, Aug 22, 2019 at 07:22:33PM +0800, Xiaowei Bao wrote:
> > > > Add multiple PFs support for DWC, different PF have different
> > > > config space we use pf-offset property which get from the DTS to
> > > > access the different pF config space.
> > >
> > > It looks like you're missing a --cover-letter again.
> > >
> > > >
> > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> > > > ---
> > > > v2:
> > > > - Remove duplicate redundant code.
> > > > - Reimplement the PF config space access way.
> > > >
> > > > drivers/pci/controller/dwc/pcie-designware-ep.c | 122
> > > ++++++++++++++++--------
> > > > drivers/pci/controller/dwc/pcie-designware.c | 59
> ++++++++----
> > > > drivers/pci/controller/dwc/pcie-designware.h | 11 ++-
> > > > 3 files changed, 134 insertions(+), 58 deletions(-)
> > > >
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > index 2bf5a35..3e2b740 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > @@ -19,12 +19,17 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep
> *ep)
> > > > pci_epc_linkup(epc);
> > > > }
> > > >
> > > > -static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum
> > > > pci_barno
> > > bar,
> > > > - int flags)
> > > > +static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
> > > > + enum pci_barno bar, int flags)
> > > > {
> > > > u32 reg;
> > > > + unsigned int func_offset = 0;
> > > > + struct dw_pcie_ep *ep = &pci->ep;
> > > >
> > > > - reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > > + if (ep->ops->func_conf_select)
> > > > + func_offset = ep->ops->func_conf_select(ep, func_no);
> > > > +
> > > > + reg = func_offset + PCI_BASE_ADDRESS_0 + (4 * bar);
> > >
> > > This pattern of checking if func_conf_select exists and using it to
> > > get an offset is repeated a lot throughout this file. You could move
> > > this functionality into a new function (similar to dw_pcie_read_dbi
> > > etc). Or perhaps a new variant of dw_pcie_writel_ should be created that
> writes takes a func_no argument.
> >
> > Thanks for your comments, I thought about this method before, but
> > there is a issue about the method of access the different func config
> > space, due to our platform use this method that different func have
> > different offset from dbi_base to access the different config space,
> > but others platform maybe use the way that write a register to
> > implement different func config space access, so I think reserve a
> > callback function
>
> My point here was really to move out duplicated code to its own small
> function.
> I wasn't making any comment about (removing) the callback, just that the test
> and callback could be in one function.
>
> > to different platform to implement the own method, my point is that,
> > if use register method they can implement the code in this function
> > and return offset is 0, if use offset method, they can return the offset value
> which can be use by dw_pcie_ep driver.
>
> By the way, I haven't looked to see how many of the dw_pcie_write_xxx
> functions would benefit from a func_no argument - if there were many calls to
> dw_pcie_write_xxx that all used a reg value originated from func_conf_select
> then an approach similar to the implementation of dw_pcie_write_dbi could
> probably be justified (i.e. rather than change the value of reg) for writing to
> functions.
I think you mean that move the if (ep->ops->func_conf_select)
func_offset = ep->ops->func_conf_select(ep, func_no); to a new function,
I will modify it in next version patch, thanks a lot.
Thanks
Xiaowei
>
> >
> > >
> > >
> > > > dw_pcie_dbi_ro_wr_en(pci);
> > > > dw_pcie_writel_dbi2(pci, reg, 0x0);
> > > > dw_pcie_writel_dbi(pci, reg, 0x0);
> > >
> > >
> > > > @@ -235,7 +257,7 @@ static int dw_pcie_ep_map_addr(struct pci_epc
> > > *epc, u8 func_no,
> > > > struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > >
> > > > - ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
> > > > + ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr,
> > > > +size);
> > > > if (ret) {
> > > > dev_err(pci->dev, "Failed to enable address\n");
> > > > return ret;
> > > > @@ -249,11 +271,15 @@ static int dw_pcie_ep_get_msi(struct pci_epc
> > > *epc, u8 func_no)
> > > > struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > u32 val, reg;
> > > > + unsigned int func_offset = 0;
> > > > +
> > > > + if (ep->ops->func_conf_select)
> > > > + func_offset = ep->ops->func_conf_select(ep, func_no);
> > > >
> > > > if (!ep->msi_cap)
> > > > return -EINVAL;
> > > >
> > > > - reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > + reg = ep->msi_cap + func_offset + PCI_MSI_FLAGS;
> > >
> > > This makes me nervous.
> > >
> > > From a PCI viewpoint, each function has it's own capability
> > > structure and within each function there may exist a MSI capability.
> > > Yet what we're doing here is using dw_pcie_ep_find_capability to get
> > > the list of capabilities for function 0, and then applying offsets from that for
> subsequent functions. I.e.
> > > we're applying DW specific knowledge to find the correct capability,
> > > rather than following the general PCI approach.
> > >
> > > I think the above hunk shouldn't be required - but instead
> > > dw_pcie_ep_find_capability is updated to take a func_no parameter.
> > >
> > > Have I understood this correctly?
> >
> > Yes, this is a issue, I think the different func maybe have different
> > capability, but the dw_pcie_ep_find_capability function is called by
> > dw_pcie_ep_init function, we can't add func_no parameter to
> > dw_pcie_ep_find_capability,
>
> Why not?
>
> Given that 'struct dw_pcie' represents a controller - and thus potentially
> multiple functions - then the _find_capability function should be able to
> provide the correct offset for the given function. Surely it needs to know
> which function number? Unless there is some reason why we can assume that
> all functions share the same capability offset.
>
> Also the 'struct dw_pcie_ep' which represents an endpoint controller - this
> has msi_cap and msix_cap fields - given this may be a multifunction device
> what do these fields actually refer to?
>
> Perhaps Jungoo/Gustavo can comment.
I have two method to fix this issue, define the msi_cap to *msi_cap, msi_cap[0]
indicate func0, msi_cap[1] indicate func1..., like this:
+ for (func_no = 0; func_no < epc->max_functions; func_no++) {
+ ep->msi_cap[func_no] =
+ dw_pcie_ep_find_capability(pci, func_no,
+ PCI_CAP_ID_MSI);
+ ep->msix_cap[func_no] =
+ dw_pcie_ep_find_capability(pci, func_no,
+ PCI_CAP_ID_MSIX);
+ }
But in Layerscape EP driver, we can't set the msi_capable of pci_epc_features struct
by ep->msix_cap, this is not correct, unless we assume if msi_cap[0] is 1, all function
will support the MSI feature. and we can return error from the get_msi or set_msi
function. I think this is the simplest way in current EP framework.
Another method is that add a callback function in pci_epc_ops, don't use the pci_epc_features
mode, but that's a big change, we need to implement the other platform callback function
like rickchip and so on.
Thanks
Xiaowei
>
>
> > I will try to fix it use a new patch, I think move this function to
> > ep_init callback function If better, thanks.
> >
> >
> > >
> > > > val = dw_pcie_readw_dbi(pci, reg);
> > > > if (!(val & PCI_MSI_FLAGS_ENABLE))
> > > > return -EINVAL;
> > > > @@ -268,11 +294,15 @@ static int dw_pcie_ep_set_msi(struct pci_epc
> > > *epc, u8 func_no, u8 interrupts)
> > > > struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > u32 val, reg;
> > > > + unsigned int func_offset = 0;
> > > > +
> > > > + if (ep->ops->func_conf_select)
> > > > + func_offset = ep->ops->func_conf_select(ep, func_no);
> > > >
> > > > if (!ep->msi_cap)
> > > > return -EINVAL;
> > > >
> > > > - reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > + reg = ep->msi_cap + func_offset + PCI_MSI_FLAGS;
> > > > val = dw_pcie_readw_dbi(pci, reg);
> > > > val &= ~PCI_MSI_FLAGS_QMASK;
> > > > val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK; @@ -288,11
> > > > +318,15 @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8
> func_no)
> > > > struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > u32 val, reg;
> > > > + unsigned int func_offset = 0;
> > > > +
> > > > + if (ep->ops->func_conf_select)
> > > > + func_offset = ep->ops->func_conf_select(ep, func_no);
> > > >
> > > > if (!ep->msix_cap)
> > > > return -EINVAL;
> > > >
> > > > - reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > > + reg = ep->msix_cap + func_offset + PCI_MSIX_FLAGS;
> > >
> > > Same for MSIX.
> >
> > Yes.
> >
> > >
> > > > val = dw_pcie_readw_dbi(pci, reg);
> > > > if (!(val & PCI_MSIX_FLAGS_ENABLE))
> > > > return -EINVAL;
> > > > @@ -307,11 +341,15 @@ static int dw_pcie_ep_set_msix(struct
> > > > pci_epc
> > > *epc, u8 func_no, u16 interrupts)
> > > > struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > u32 val, reg;
> > > > + unsigned int func_offset = 0;
> > > > +
> > > > + if (ep->ops->func_conf_select)
> > > > + func_offset = ep->ops->func_conf_select(ep, func_no);
> > > >
> > > > if (!ep->msix_cap)
> > > > return -EINVAL;
> > > >
> > > > - reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > > + reg = ep->msix_cap + func_offset + PCI_MSIX_FLAGS;
> > > > val = dw_pcie_readw_dbi(pci, reg);
> > > > val &= ~PCI_MSIX_FLAGS_QSIZE;
> > > > val |= interrupts;
> > > > @@ -398,29 +436,33 @@ int dw_pcie_ep_raise_msi_irq(struct
> > > dw_pcie_ep *ep, u8 func_no,
> > > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > struct pci_epc *epc = ep->epc;
> > > > unsigned int aligned_offset;
> > > > + unsigned int func_offset = 0;
> > > > u16 msg_ctrl, msg_data;
> > > > u32 msg_addr_lower, msg_addr_upper, reg;
> > > > u64 msg_addr;
> > > > bool has_upper;
> > > > int ret;
> > > >
> > > > + if (ep->ops->func_conf_select)
> > > > + func_offset = ep->ops->func_conf_select(ep, func_no);
> > > > +
> > >
> > > You could probably move this hunk below the test for msi_cap to save
> > > some cycles.
> >
> > Sorry, I didn't understand the means, please explain it detailly,
> > thanks a lot, ^_^
>
> If you insert the call to func_conf_select *after* the test for !msi_cap below -
> then in the case where msi_cap is NULL then you will save some CPU cycles
> by not bothering to call func_conf_select.
Got it, thanks a lot. ^_^
Thanks
Xiaowei
>
>
> > >
> > > > if (!ep->msi_cap)
> > > > return -EINVAL;
> > > >
> > > > /* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1.
> */
> > > > - reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > + reg = ep->msi_cap + func_offset + PCI_MSI_FLAGS;
> > > > msg_ctrl = dw_pcie_readw_dbi(pci, reg);
> > > > has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
> > > > - reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
> > > > + reg = ep->msi_cap + func_offset + PCI_MSI_ADDRESS_LO;
> > > > msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > > > if (has_upper) {
> > > > - reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
> > > > + reg = ep->msi_cap + func_offset + PCI_MSI_ADDRESS_HI;
> > > > msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
> > > > - reg = ep->msi_cap + PCI_MSI_DATA_64;
> > > > + reg = ep->msi_cap + func_offset + PCI_MSI_DATA_64;
> > > > msg_data = dw_pcie_readw_dbi(pci, reg);
> > > > } else {
> > > > msg_addr_upper = 0;
> > > > - reg = ep->msi_cap + PCI_MSI_DATA_32;
> > > > + reg = ep->msi_cap + func_offset + PCI_MSI_DATA_32;
> > > > msg_data = dw_pcie_readw_dbi(pci, reg);
> > > > }
> > > > aligned_offset = msg_addr_lower & (epc->mem->page_size - 1);
> > >
> > >
> > >
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> > > > b/drivers/pci/controller/dwc/pcie-designware.c
> > > > index 7d25102..305e73d 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > > @@ -158,9 +158,10 @@ static void dw_pcie_writel_ob_unroll(struct
> > > dw_pcie *pci, u32 index, u32 reg,
> > > > dw_pcie_writel_atu(pci, offset + reg, val); }
> > > >
> > > > -static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci,
> > > > int
> > > index,
> > > > - int type, u64 cpu_addr,
> > > > - u64 pci_addr, u32 size)
> > > > +static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci,
> > > > +u8
> > > func_no,
> > > > + int index, int type,
> > > > + u64 cpu_addr, u64 pci_addr,
> > > > + u32 size)
> > > > {
> > > > u32 retries, val;
> > > >
> > > > @@ -175,7 +176,7 @@ static void
> > > dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
> > > > dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_UPPER_TARGET,
> > > > upper_32_bits(pci_addr));
> > > > dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_REGION_CTRL1,
> > > > - type);
> > > > + type | PCIE_ATU_FUNC_NUM(func_no));
> > >
> > > Much better :)
> >
> > Do you mean that use the expression "a? b:c"
> >
> > >
> > > > dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_REGION_CTRL2,
> > > > PCIE_ATU_ENABLE);
> > > >
> > > > @@ -194,8 +195,9 @@ static void
> > > dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
> > > > dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > >
> > > > -void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int
> type,
> > > > - u64 cpu_addr, u64 pci_addr, u32 size)
> > > > +static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8
> > > func_no,
> > > > + int index, int type, u64 cpu_addr,
> > > > + u64 pci_addr, u32 size)
> > > > {
> > > > u32 retries, val;
> > > >
> > > > @@ -203,8 +205,8 @@ void dw_pcie_prog_outbound_atu(struct
> dw_pcie
> > > *pci, int index, int type,
> > > > cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
> > > >
> > > > if (pci->iatu_unroll_enabled) {
> > > > - dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
> > > > - pci_addr, size);
> > > > + dw_pcie_prog_outbound_atu_unroll(pci, func_no, index, type,
> > > > + cpu_addr, pci_addr, size);
> > > > return;
> > > > }
> > > >
> > >
> > >
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> > > > b/drivers/pci/controller/dwc/pcie-designware.h
> > > > index ffed084..a0fdbf7 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > > > @@ -71,9 +71,11 @@
> > > > #define PCIE_ATU_TYPE_IO 0x2
> > > > #define PCIE_ATU_TYPE_CFG0 0x4
> > > > #define PCIE_ATU_TYPE_CFG1 0x5
> > > > +#define PCIE_ATU_FUNC_NUM(pf) (pf << 20)
> > >
> > > "Macro argument 'pf' may be better as '(pf)' to avoid precedence issues"
> > >
> > > > #define PCIE_ATU_CR2 0x908
> > > > #define PCIE_ATU_ENABLE BIT(31)
> > > > #define PCIE_ATU_BAR_MODE_ENABLE BIT(30)
> > > > +#define PCIE_ATU_FUNC_NUM_MATCH_EN BIT(19)
> > > > #define PCIE_ATU_LOWER_BASE 0x90C
> > > > #define PCIE_ATU_UPPER_BASE 0x910
> > > > #define PCIE_ATU_LIMIT 0x914
> > > > @@ -197,6 +199,7 @@ struct dw_pcie_ep_ops {
> > > > int (*raise_irq)(struct dw_pcie_ep *ep, u8 func_no,
> > > > enum pci_epc_irq_type type, u16 interrupt_num);
> > > > const struct pci_epc_features* (*get_features)(struct dw_pcie_ep
> > > > *ep);
> > > > + unsigned int (*func_conf_select)(struct dw_pcie_ep *ep, u8
> > > > +func_no);
> > >
> > > Given that this function will return an offset, I'm not sure the
> > > name you have is suitable. Something like get_pf_offset or similar is more
> descriptive.
> >
> > As above explain, my initial view is that this function can return 0
> > or offset depends on the platform implement mechanism, so I named it
> > func_conf_select, I think add a comment for this function, like this:
> > /*
> > * provide a method to implement the method of different func config
> > space access,
> > * if use offset method, return the offset from dbi_base, if your
> > register method, implement
> > * the code in this callback function and return 0.
> > */
> > How about it?
>
> This means that func_conf_select can never (easily) indicate an error to the
> caller as this would change the offset. Where func_conf_select doesn't
> change the offset there probably isn't much else it can do instead (unless it
> was responsible for doing the write as well). So I'm not sure how well this
> approach works.
We can use int type of this function and return a negative value when a error
occurred, that is to say:
if(func_no && !pcie->drvdata->func_offset)
return -1;
but we need to set a flag to differentiate the method of config space access, that
is we can return -1 in func_offset method, another method we only return 0.
Thanks
Xiaowei
>
> Thanks,
>
> Andrew Murray
>
> >
> > >
> > > Thanks,
> > >
> > > Andrew Murray
> > >
> > > > };
> > > >
> > > > struct dw_pcie_ep {
> > > > @@ -265,8 +268,12 @@ int dw_pcie_wait_for_link(struct dw_pcie
> > > > *pci); void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> > > > int type, u64 cpu_addr, u64 pci_addr,
> > > > u32 size);
> > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > > > - u64 cpu_addr, enum dw_pcie_as_type as_type);
> > > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8
> > > > +func_no, int
> > > index,
> > > > + int type, u64 cpu_addr, u64 pci_addr,
> > > > + u32 size);
> > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int
> index,
> > > > + int bar, u64 cpu_addr,
> > > > + enum dw_pcie_as_type as_type);
> > > > void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
> > > > enum dw_pcie_region_type type); void
> dw_pcie_setup(struct
> > > > dw_pcie *pci);
> > > > --
> > > > 2.9.5
> > > >
