On Mon, Aug 26, 2019 at 01:01:40PM +0530, Vidya Sagar wrote:
> Add support to configure sideband signal pins when information is present
> in respective controller's device-tree node.
>
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
> drivers/pci/controller/dwc/pcie-tegra194.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index fc0dbeb31d78..8a27b25893c9 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -1308,6 +1308,12 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
> return ret;
> }
>
> + ret = pinctrl_pm_select_default_state(pcie->dev);
> + if (ret < 0) {
> + dev_err(pcie->dev, "Failed to configure sideband pins\n");
I think you can just use dev instead of pcie->dev here.
> + return ret;
Don't you need to pm_runtime_put_sync and pm_runtime_disable here?
Thanks,
Andrew Murray
> + }
> +
> tegra_pcie_init_controller(pcie);
>
> pcie->link_state = tegra_pcie_dw_link_up(&pcie->pci);
> --
> 2.17.1
>
