[PATCH 6/6] PCI: tegra: Add support to enable slot regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support to get regulator information of 3.3V and 12V supplies of a PCIe
slot from the respective controller's device-tree node and enable those
supplies. This is required in platforms like p2972-0000 where the supplies
to x16 slot owned by C5 controller need to be enabled before attempting to
enumerate the devices.

Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 65 ++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 8a27b25893c9..97de2151a738 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -278,6 +278,8 @@ struct tegra_pcie_dw {
 	u32 aspm_l0s_enter_lat;
 
 	struct regulator *pex_ctl_supply;
+	struct regulator *slot_ctl_3v3;
+	struct regulator *slot_ctl_12v;
 
 	unsigned int phy_count;
 	struct phy **phys;
@@ -1047,6 +1049,59 @@ static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie)
 	}
 }
 
+static void tegra_pcie_get_slot_regulators(struct tegra_pcie_dw *pcie)
+{
+	pcie->slot_ctl_3v3 = devm_regulator_get_optional(pcie->dev, "vpcie3v3");
+	if (IS_ERR(pcie->slot_ctl_3v3))
+		pcie->slot_ctl_3v3 = NULL;
+
+	pcie->slot_ctl_12v = devm_regulator_get_optional(pcie->dev, "vpcie12v");
+	if (IS_ERR(pcie->slot_ctl_12v))
+		pcie->slot_ctl_12v = NULL;
+}
+
+static int tegra_pcie_enable_slot_regulators(struct tegra_pcie_dw *pcie)
+{
+	int ret;
+
+	if (pcie->slot_ctl_3v3) {
+		ret = regulator_enable(pcie->slot_ctl_3v3);
+		if (ret < 0) {
+			dev_err(pcie->dev,
+				"Failed to enable 3V3 slot supply: %d\n", ret);
+			return ret;
+		}
+	}
+
+	if (pcie->slot_ctl_12v) {
+		ret = regulator_enable(pcie->slot_ctl_12v);
+		if (ret < 0) {
+			dev_err(pcie->dev,
+				"Failed to enable 12V slot supply: %d\n", ret);
+			if (pcie->slot_ctl_3v3)
+				regulator_disable(pcie->slot_ctl_3v3);
+			return ret;
+		}
+	}
+
+	/*
+	 * According to PCI Express Card Electromechanical Specification
+	 * Revision 1.1, Table-2.4, T_PVPERL (Power stable to PERST# inactive)
+	 * should be a minimum of 100ms.
+	 */
+	msleep(100);
+
+	return 0;
+}
+
+static void tegra_pcie_disable_slot_regulators(struct tegra_pcie_dw *pcie)
+{
+	if (pcie->slot_ctl_12v)
+		regulator_disable(pcie->slot_ctl_12v);
+	if (pcie->slot_ctl_3v3)
+		regulator_disable(pcie->slot_ctl_3v3);
+}
+
 static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
 					bool en_hw_hot_rst)
 {
@@ -1060,6 +1115,10 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
 		return ret;
 	}
 
+	ret = tegra_pcie_enable_slot_regulators(pcie);
+	if (ret < 0)
+		goto fail_slot_reg_en;
+
 	ret = regulator_enable(pcie->pex_ctl_supply);
 	if (ret < 0) {
 		dev_err(pcie->dev, "Failed to enable regulator: %d\n", ret);
@@ -1142,6 +1201,8 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
 fail_core_clk:
 	regulator_disable(pcie->pex_ctl_supply);
 fail_reg_en:
+	tegra_pcie_disable_slot_regulators(pcie);
+fail_slot_reg_en:
 	tegra_pcie_bpmp_set_ctrl_state(pcie, false);
 
 	return ret;
@@ -1174,6 +1235,8 @@ static int __deinit_controller(struct tegra_pcie_dw *pcie)
 		return ret;
 	}
 
+	tegra_pcie_disable_slot_regulators(pcie);
+
 	ret = tegra_pcie_bpmp_set_ctrl_state(pcie, false);
 	if (ret) {
 		dev_err(pcie->dev, "Failed to disable controller %d: %d\n",
@@ -1372,6 +1435,8 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	tegra_pcie_get_slot_regulators(pcie);
+
 	pcie->pex_ctl_supply = devm_regulator_get(dev, "vddio-pex-ctl");
 	if (IS_ERR(pcie->pex_ctl_supply)) {
 		dev_err(dev, "Failed to get regulator: %ld\n",
-- 
2.17.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux