Make the log facility used to print warnings to be KERN_WARNING
explicitly, rather than rely on the current (or default) value
of the MESSAGE_LOGLEVEL_DEFAULT set in Kconfig. This will make
all the warnings in the arch/x86/pci/pcbios.c to be printed
consistently at the same log facility.
Replace printk(KERN_<level> ...) with corresponding pr_ macros,
while adding the missing log facility.
Signed-off-by: Krzysztof Wilczynski <kw@xxxxxxxxx>
---
arch/x86/pci/pcbios.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 9c97d814125e..0c3673f50bce 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -47,7 +47,7 @@ static inline void set_bios_x(void)
pcibios_enabled = 1;
set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT);
if (__supported_pte_mask & _PAGE_NX)
- printk(KERN_INFO "PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
+ pr_info("PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
}
/*
@@ -111,10 +111,10 @@ static unsigned long __init bios32_service(unsigned long service)
case 0:
return address + entry;
case 0x80: /* Not present */
- printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service);
+ pr_warn("bios32_service(0x%lx): not present\n", service);
return 0;
default: /* Shouldn't happen */
- printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
+ pr_warn("bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
service, return_code);
return 0;
}
@@ -163,11 +163,11 @@ static int __init check_pcibios(void)
DBG("PCI: BIOS probe returned s=%02x hw=%02x ver=%02x.%02x l=%02x\n",
status, hw_mech, major_ver, minor_ver, pcibios_last_bus);
if (status || signature != PCI_SIGNATURE) {
- printk (KERN_ERR "PCI: BIOS BUG #%x[%08x] found\n",
+ pr_err("PCI: BIOS BUG #%x[%08x] found\n",
status, signature);
return 0;
}
- printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
+ pr_info("PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
major_ver, minor_ver, pcibios_entry, pcibios_last_bus);
#ifdef CONFIG_PCI_DIRECT
if (!(hw_mech & PCIBIOS_HW_TYPE1))
@@ -316,13 +316,13 @@ static const struct pci_raw_ops *__init pci_find_bios(void)
if (sum != 0)
continue;
if (check->fields.revision != 0) {
- printk("PCI: unsupported BIOS32 revision %d at 0x%p\n",
+ pr_warn("PCI: unsupported BIOS32 revision %d at 0x%p\n",
check->fields.revision, check);
continue;
}
DBG("PCI: BIOS32 Service Directory structure at 0x%p\n", check);
if (check->fields.entry >= 0x100000) {
- printk("PCI: BIOS32 entry (0x%p) in high memory, "
+ pr_warn("PCI: BIOS32 entry (0x%p) in high memory, "
"cannot use.\n", check);
return NULL;
} else {
@@ -386,7 +386,7 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
: "memory");
DBG("OK ret=%d, size=%d, map=%x\n", ret, opt.size, map);
if (ret & 0xff00)
- printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
+ pr_err("PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
else if (opt.size) {
rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
if (rt) {
@@ -394,7 +394,7 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
rt->size = opt.size + sizeof(struct irq_routing_table);
rt->exclusive_irqs = map;
memcpy(rt->slots, (void *) page, opt.size);
- printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n");
+ pr_info("PCI: Using BIOS Interrupt Routing Table\n");
}
}
free_page(page);
--
2.22.1
