> -----Original Message----- > From: Andrew Murray <andrew.murray@xxxxxxx> > Sent: 2019年8月23日 21:58 > To: Xiaowei Bao <xiaowei.bao@xxxxxxx> > Cc: bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; > shawnguo@xxxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>; kishon@xxxxxx; > lorenzo.pieralisi@xxxxxx; arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; M.h. > Lian <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy > Zang <roy.zang@xxxxxxx>; jingoohan1@xxxxxxxxx; > gustavo.pimentel@xxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx > Subject: Re: [PATCH v2 07/10] PCI: layerscape: Modify the MSIX to the > doorbell way > > On Thu, Aug 22, 2019 at 07:22:39PM +0800, Xiaowei Bao wrote: > > The layerscape platform use the doorbell way to trigger MSIX interrupt > > in EP mode. > > > > I have no problems with this patch, however... > > Are you able to add to this message a reason for why you are making this > change? Did dw_pcie_ep_raise_msix_irq not work when func_no != 0? Or did > it work yet dw_pcie_ep_raise_msix_irq_doorbell is more efficient? The fact is that, this driver is verified in ls1046a platform of NXP before, and ls1046a don't support MSIX feature, so I set the msix_capable of pci_epc_features struct is false, but in other platform, e.g. ls1088a, it support the MSIX feature, I verified the MSIX feature in ls1088a, it is not OK, so I changed to another way. Thanks. > > Thanks, > > Andrew Murray > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx> > > --- > > v2: > > - No change. > > > > drivers/pci/controller/dwc/pci-layerscape-ep.c | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c > > b/drivers/pci/controller/dwc/pci-layerscape-ep.c > > index 8461f62..7ca5fe8 100644 > > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c > > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c > > @@ -74,7 +74,8 @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, > u8 func_no, > > case PCI_EPC_IRQ_MSI: > > return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num); > > case PCI_EPC_IRQ_MSIX: > > - return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num); > > + return dw_pcie_ep_raise_msix_irq_doorbell(ep, func_no, > > + interrupt_num); > > default: > > dev_err(pci->dev, "UNKNOWN IRQ type\n"); > > return -EINVAL; > > -- > > 2.9.5 > >
