RE: [PATCH v2 02/10] PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Andrew Murray <andrew.murray@xxxxxxx>
> Sent: 2019年8月23日 21:36
> To: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> Cc: bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> shawnguo@xxxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>; kishon@xxxxxx;
> lorenzo.pieralisi@xxxxxx; arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; M.h.
> Lian <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy
> Zang <roy.zang@xxxxxxx>; jingoohan1@xxxxxxxxx;
> gustavo.pimentel@xxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> Subject: Re: [PATCH v2 02/10] PCI: designware-ep: Add the doorbell mode of
> MSI-X in EP mode
> 
> On Thu, Aug 22, 2019 at 07:22:34PM +0800, Xiaowei Bao wrote:
> > Add the doorbell mode of MSI-X in EP mode.
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> > ---
> > v2:
> >  - Remove the macro of no used.
> >
> >  drivers/pci/controller/dwc/pcie-designware-ep.c | 14 ++++++++++++++
> >  drivers/pci/controller/dwc/pcie-designware.h    | 12 ++++++++++++
> >  2 files changed, 26 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index 3e2b740..b8388f8 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -480,6 +480,20 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep
> *ep, u8 func_no,
> >  	return 0;
> >  }
> >
> > +int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8
> func_no,
> > +				       u16 interrupt_num)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	u32 msg_data;
> > +
> > +	msg_data = (func_no << PCIE_MSIX_DOORBELL_PF_SHIFT) |
> > +		   (interrupt_num - 1);
> > +
> > +	dw_pcie_writel_dbi(pci, PCIE_MSIX_DOORBELL, msg_data);
> > +
> > +	return 0;
> > +}
> > +
> >  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
> >  			      u16 interrupt_num)
> >  {
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> > b/drivers/pci/controller/dwc/pcie-designware.h
> > index a0fdbf7..895a9ef 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -88,6 +88,9 @@
> >  #define PCIE_MISC_CONTROL_1_OFF		0x8BC
> >  #define PCIE_DBI_RO_WR_EN		BIT(0)
> >
> > +#define PCIE_MSIX_DOORBELL		0x948
> > +#define PCIE_MSIX_DOORBELL_PF_SHIFT	24
> > +
> >  /*
> >   * iATU Unroll-specific register definitions
> >   * From 4.80 core version the address translation will be made by
> > unroll @@ -400,6 +403,8 @@ int dw_pcie_ep_raise_msi_irq(struct
> dw_pcie_ep *ep, u8 func_no,
> >  			     u8 interrupt_num);
> >  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
> >  			     u16 interrupt_num);
> > +int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8
> func_no,
> > +				       u16 interrupt_num);
> >  void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar);
> > #else  static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep) @@
> > -432,6 +437,13 @@ static inline int dw_pcie_ep_raise_msix_irq(struct
> dw_pcie_ep *ep, u8 func_no,
> >  	return 0;
> >  }
> >
> > +static inline int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep
> *ep,
> > +						     u8 func_no,
> > +						     u16 interrupt_num)
> > +{
> > +	return 0;
> > +}
> > +
> 
> Looks OK to me.
> 
> Reviewed-by: Andrew Murray <andrew.murray@xxxxxxx>

Thanks a lot.

> 
> >  static inline void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum
> > pci_barno bar)  {  }
> > --
> > 2.9.5
> >




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux