On Thu, Aug 22, 2019 at 11:55:53AM +0300, Mika Westerberg wrote:
> In order to solve a problem on a system where PCIe switch upstream port
> incorrectly identifies itself as downstream port commit d0751b98dfa3
> ("PCI: Add dev->has_secondary_link to track downstream PCIe links")
> introduced a flag to struct pci_dev that can be used to determine which
> side of the port the link is.
>
> The problem with this approach is that each time caller wants to
> determine whether the port is upstream or downstream, it may need to
> look at the dev->has_secondary_link as well. Making the calling code
> unnecessary complicated.
>
> Instead of this, we can correct the type of the port itself so that
> pci_pcie_type() returns the actual type regardless of what the port
> claims it is. Then update the users to call pci_pcie_type() and
> pcie_downstream_port() accordingly.
>
> This allows us to remove dev->has_secondary_flag completely.
Looks better and cleaner now. FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>
> Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@xxxxxxxxxx/
> Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> ---
> I haven't been able to test this properly since I don't have access to any
> system having the issue. I tried on a couple of systems without the issue
> and did not see any problems, though.
>
> @Robert, as the reporter of the original issue if you still have access to
> any of these systems I would appreciate if you could give this patch series
> a try.
>
> drivers/pci/pci.c | 2 +-
> drivers/pci/pcie/aspm.c | 8 +++----
> drivers/pci/pcie/err.c | 2 +-
> drivers/pci/probe.c | 48 ++++++++++++++++++++++++-----------------
> drivers/pci/vc.c | 4 +++-
> include/linux/pci.h | 1 -
> 6 files changed, 37 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 9ac50710f1d4..3c0672f1dfe7 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3577,7 +3577,7 @@ int pci_enable_atomic_ops_to_root(struct pci_dev *dev, u32 cap_mask)
> }
>
> /* Ensure upstream ports don't block AtomicOps on egress */
> - if (!bridge->has_secondary_link) {
> + if (pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM) {
> pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2,
> &ctl2);
> if (ctl2 & PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK)
> diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> index 464f8f92653f..2776d34be693 100644
> --- a/drivers/pci/pcie/aspm.c
> +++ b/drivers/pci/pcie/aspm.c
> @@ -913,10 +913,10 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
>
> /*
> * We allocate pcie_link_state for the component on the upstream
> - * end of a Link, so there's nothing to do unless this device has a
> - * Link on its secondary side.
> + * end of a Link, so there's nothing to do unless this device is
> + * downstream port.
> */
> - if (!pdev->has_secondary_link)
> + if (!pcie_downstream_port(pdev))
> return;
>
> /* VIA has a strange chipset, root port is under a bridge */
> @@ -1070,7 +1070,7 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
> if (!pci_is_pcie(pdev))
> return 0;
>
> - if (pdev->has_secondary_link)
> + if (pcie_downstream_port(pdev))
> parent = pdev;
> if (!parent || !parent->link_state)
> return -EINVAL;
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 773197a12568..b0e6048a9208 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -166,7 +166,7 @@ static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
> driver = pcie_port_find_service(dev, service);
> if (driver && driver->reset_link) {
> status = driver->reset_link(dev);
> - } else if (dev->has_secondary_link) {
> + } else if (pcie_downstream_port(dev)) {
> status = default_reset_link(dev);
> } else {
> pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index a3c7338fad86..01752a63cd15 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1431,26 +1431,38 @@ void set_pcie_port_type(struct pci_dev *pdev)
> pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16);
> pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
>
> + parent = pci_upstream_bridge(pdev);
> + if (!parent)
> + return;
> +
> /*
> - * A Root Port or a PCI-to-PCIe bridge is always the upstream end
> - * of a Link. No PCIe component has two Links. Two Links are
> - * connected by a Switch that has a Port on each Link and internal
> - * logic to connect the two Ports.
> + * Some systems do not identify their upstream/downstream ports
> + * correctly so detect impossible configurations here and correct
> + * the port type accordingly.
> */
> type = pci_pcie_type(pdev);
> - if (type == PCI_EXP_TYPE_ROOT_PORT ||
> - type == PCI_EXP_TYPE_PCIE_BRIDGE)
> - pdev->has_secondary_link = 1;
> - else if (type == PCI_EXP_TYPE_UPSTREAM ||
> - type == PCI_EXP_TYPE_DOWNSTREAM) {
> - parent = pci_upstream_bridge(pdev);
> -
> + if (type == PCI_EXP_TYPE_DOWNSTREAM) {
> /*
> - * Usually there's an upstream device (Root Port or Switch
> - * Downstream Port), but we can't assume one exists.
> + * If pdev claims to be downstream port but the parent
> + * device is also downstream port assume pdev is actually
> + * upstream port.
> */
> - if (parent && !parent->has_secondary_link)
> - pdev->has_secondary_link = 1;
> + if (pcie_downstream_port(parent)) {
> + pci_info(pdev, "claims to be downstream port but is acting as upstream port, correcting type\n");
> + pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
> + pdev->pcie_flags_reg |= PCI_EXP_TYPE_UPSTREAM;
> + }
> + } else if (type == PCI_EXP_TYPE_UPSTREAM) {
> + /*
> + * If pdev claims to be upstream port but the parent
> + * device is also upstream port assume pdev is actually
> + * downstream port.
> + */
> + if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) {
> + pci_info(pdev, "claims to be upstream port but is acting as downstream port, correcting type\n");
> + pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
> + pdev->pcie_flags_reg |= PCI_EXP_TYPE_DOWNSTREAM;
> + }
> }
> }
>
> @@ -2764,12 +2776,8 @@ static int only_one_child(struct pci_bus *bus)
> * A PCIe Downstream Port normally leads to a Link with only Device
> * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan
> * only for Device 0 in that situation.
> - *
> - * Checking has_secondary_link is a hack to identify Downstream
> - * Ports because sometimes Switches are configured such that the
> - * PCIe Port Type labels are backwards.
> */
> - if (bridge && pci_is_pcie(bridge) && bridge->has_secondary_link)
> + if (bridge && pci_is_pcie(bridge) && pcie_downstream_port(bridge))
> return 1;
>
> return 0;
> diff --git a/drivers/pci/vc.c b/drivers/pci/vc.c
> index 5acd9c02683a..9ae9fb9339e8 100644
> --- a/drivers/pci/vc.c
> +++ b/drivers/pci/vc.c
> @@ -13,6 +13,8 @@
> #include <linux/pci_regs.h>
> #include <linux/types.h>
>
> +#include "pci.h"
> +
> /**
> * pci_vc_save_restore_dwords - Save or restore a series of dwords
> * @dev: device
> @@ -105,7 +107,7 @@ static void pci_vc_enable(struct pci_dev *dev, int pos, int res)
> struct pci_dev *link = NULL;
>
> /* Enable VCs from the downstream device */
> - if (!dev->has_secondary_link)
> + if (!pci_is_pcie(dev) || !pcie_downstream_port(dev))
> return;
>
> ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 82e4cd1b7ac3..2f8990246316 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -418,7 +418,6 @@ struct pci_dev {
> unsigned int broken_intx_masking:1; /* INTx masking can't be used */
> unsigned int io_window_1k:1; /* Intel bridge 1K I/O windows */
> unsigned int irq_managed:1;
> - unsigned int has_secondary_link:1;
> unsigned int non_compliant_bars:1; /* Broken BARs; ignore them */
> unsigned int is_probed:1; /* Device probing in progress */
> unsigned int link_active_reporting:1;/* Device capable of reporting link active */
> --
> 2.23.0.rc1
>
--
With Best Regards,
Andy Shevchenko
