[PATCHv2 0/4] Layerscape: Remove num-lanes property from PCIe nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>

On FSL Layerscape SoCs, the number of lanes assigned to PCIe
controller is not fixed, it is determined by the selected
SerDes protocol. The current num-lanes indicates the max lanes
PCIe controller can support up to, instead of the lanes assigned
to the PCIe controller. This can result in PCIe link training fail
after hot-reset.

Hou Zhiqiang (4):
  dt-bindings: PCI: designware: Remove the num-lanes from Required
    properties
  PCI: dwc: Return directly when num-lanes is not found
  ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes
  arm64: dts: fsl: Remove num-lanes property from PCIe nodes

 Documentation/devicetree/bindings/pci/designware-pcie.txt | 1 -
 arch/arm/boot/dts/ls1021a.dtsi                            | 2 --
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi            | 1 -
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi            | 3 ---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi            | 6 ------
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi            | 3 ---
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi            | 4 ----
 drivers/pci/controller/dwc/pcie-designware.c              | 6 ++++--
 8 files changed, 4 insertions(+), 22 deletions(-)

-- 
2.17.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux