On Mon, May 27, 2019 at 12:51:51AM +0200, marek.vasut@xxxxxxxxx wrote:
> From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
>
> On ARM64 R-Car Gen3 R8A7795 system with Intel NVMe SSD inserted into the
> PCIe slot, with CONFIG_PROVE_LOCKING=y enabled in the kernel config, the
> following lockdep warning can be triggered:
>
> $ lspci
> 01:00.0 Class 0108: 8086:f1a5 # This is the NVMe SSD
> 00:00.0 Class 0604: 1912:0025 # This is the PCIe root port
>
> $ echo 1 > /sys/class/pci_bus/0000\:00/device/0000\:00\:00.0/remove
> nvme nvme0: failed to set APST feature (-19)
>
> ============================================
> WARNING: possible recursive locking detected
> 5.2.0-rc1-next-20190524-00018-gd76fa47ee507 #57 Not tainted
> --------------------------------------------
> sh/1616 is trying to acquire lock:
> (____ptrval____) (kn->count#21){++++}, at: kernfs_remove_by_name_ns+0x4c/0x98
>
> but task is already holding lock:
> (____ptrval____) (kn->count#21){++++}, at: kernfs_remove_self+0xec/0x150
>
> other info that might help us debug this:
> Possible unsafe locking scenario:
>
> CPU0
> ----
> lock(kn->count#21);
> lock(kn->count#21);
>
> *** DEADLOCK ***
>
> May be due to missing lock nesting notation
>
> 4 locks held by sh/1616:
> #0: (____ptrval____) (sb_writers#4){.+.+}, at: vfs_write+0x190/0x1b0
> #1: (____ptrval____) (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1f0
> #2: (____ptrval____) (kn->count#21){++++}, at: kernfs_remove_self+0xec/0x150
> #3: (____ptrval____) (pci_rescan_remove_lock){+.+.}, at: pci_lock_rescan_remove+0x1c/0x28
>
> stack backtrace:
> CPU: 0 PID: 1616 Comm: sh Not tainted 5.2.0-rc1-next-20190524-00018-gd76fa47ee507 #57
> Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
> Call trace:
> dump_backtrace+0x0/0x130
> show_stack+0x14/0x20
> dump_stack+0xd4/0x11c
> __lock_acquire+0x1df8/0x1e58
> lock_acquire+0xdc/0x258
> __kernfs_remove+0x290/0x2f8
> kernfs_remove_by_name_ns+0x4c/0x98
> remove_files.isra.0+0x38/0x78
> sysfs_remove_group+0x4c/0xa0
> sysfs_remove_groups+0x34/0x50
> device_remove_attrs+0x50/0x70
> device_del+0x13c/0x350
> pci_remove_bus_device+0x78/0x100
> pci_remove_bus_device+0x34/0x100
> pci_stop_and_remove_bus_device_locked+0x24/0x38
> remove_store+0x88/0x98
> dev_attr_store+0x14/0x28
> sysfs_kf_write+0x48/0x70
> kernfs_fop_write+0xe4/0x1f0
> __vfs_write+0x18/0x40
> vfs_write+0xa4/0x1b0
> ksys_write+0x64/0xe8
> __arm64_sys_write+0x18/0x20
> el0_svc_common.constprop.0+0x90/0x168
> el0_svc_compat_handler+0x18/0x20
> el0_svc_compat+0x8/0x10
> pci_bus 0000:01: busn_res: [bus 01] is released
>
> The crash is not isolated to NVMe SSDs, but pretty much any other PCIe
> device will trigger it as well ; empty slot will not. The NVMe SSD was
> just available for this particular test, Intel e1000 or IGB ethernet
> triggers the same.
>
> The lockdep complains about trying to acquire the same lock from the
> same process again, however that is not true. What really happens is
> that every "remove" sysfs attribute of a PCI device has the same
> lockdep key, which then confuses lockdep and triggers this warning
> on two unrelated locks.
>
> The echo 1 > /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove
> triggers drivers/pci/pci-sysfs.c remove_store(), which first calls
> device_remove_file_self() on /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove
> file. This requires calling kernfs_break_active_protection(), since
> kernfs_fop_open() holds a rwsem lock on the file, using
> rwsem_acquire_read(&kn->dep_map, 0, 1, _RET_IP_); in kernfs_get_active(),
> and the kernfs_break_active_protection() releases the lock, allowing the
> file to be safely removed. The lock is reinstated by calling
> kernfs_unbreak_active_protection() after the removal. This rwsem
> operation has a small side-effect in that it registers a lockdep class
> with the kernfs/sysfs attribute key and this is now in lockdep cache.
>
> The remove_store() continues by calling pci_stop_and_remove_bus_device_locked(),
> which calls pci_stop_and_remove_bus_device(), pci_remove_bus_device(),
> device_del() on the subdevices. The interesting one is PCI device 00:01.0
> and specifically it's "remove" attribute again, on which the code calls
> kernfs_remove_by_name_ns(), which calls __kernfs_remove() and then
> kernfs_drain(), which finally requests a rwsem lock using
> rwsem_acquire(&kn->dep_map, 0, 0, _RET_IP_); . This is where the
> lockdep generates the backtrace as seen at the beginning.
>
> The kernfs_node "kn" in each of the previous paragraphs is different
> kernfs node, however the lockdep key for kn->dep_map is the same.
> This is because when the "remove" sysfs attibute is created in
> __kernfs_create_file(), the "key" passed in is the same.
>
> The "key" is assigned to the attribute via drivers/pci/probe.c:pci_device_add(),
> which calls device_add(&dev->dev) defined in drivers/base/core.c. The device_add()
> calls device_add_attrs(), device_add_groups(), sysfs_create_groups(),
> fs/sysfs/group.c:sysfs_create_group(), internal_create_group() and
> create_files(). The create_files() iterates over all attribute tables
> associted with "dev" device and calls sysfs_add_file_mode_ns() from
> fs/sysfs/file.c, which ends up calling __kernfs_create_file() with
> key = attr->key ?: (struct lock_class_key *)&attr->skey; .
>
> The attribute list gets assigned to the "dev" device in pci_alloc_dev()
> and points to const struct device_type pci_dev_type in
> drivers/pci/pci-sysfs.c , which contains the attribute groups and then
> arrays of sysfs attributes. Since these arrays are static and constant,
> each and every newly allocated PCI device triggers creation of kernfs
> objects with the same attribute pointer and thus the same attribute key
> pointer, and thus the same lockdep key.
>
> This patch marks the "remove" sysfs attribute with __ATTR_IGNORE_LOCKDEP()
> as it is safe to ignore the lockdep check between different "remove"
> kernfs instances. However, the better solution might be to allocate
> new attribute key for every newly allocated PCI device.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Cc: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> Cc: Tejun Heo <tj@xxxxxxxxxx>
> Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
> To: linux-pci@xxxxxxxxxxxxxxx
Applied to pci/enumeration for v5.3, thanks, Marek!
> ---
> NOTE: The "rescan" attribute has similar issues
> NOTE: This is a different take on https://patchwork.kernel.org/patch/10669333/
> ---
> drivers/pci/pci-sysfs.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 6d27475e39b2..4e83c347de5d 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -477,7 +477,7 @@ static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
> pci_stop_and_remove_bus_device_locked(to_pci_dev(dev));
> return count;
> }
> -static struct device_attribute dev_remove_attr = __ATTR(remove,
> +static struct device_attribute dev_remove_attr = __ATTR_IGNORE_LOCKDEP(remove,
> (S_IWUSR|S_IWGRP),
> NULL, remove_store);
>
> --
> 2.20.1
>
