[ Trimming recipients list ] On 11/06/2019 17:55, Lorenzo Pieralisi wrote: > On Thu, Mar 28, 2019 at 05:59:48PM +0100, Marc Gonzalez wrote: > >> After a lot of poking, I am finally able to use the AR8151 ethernet on the APQ8098 board. >> The magic bits are the iommu-map prop and the PCIE20_PARF_BDF_TRANSLATE_N setup. >> >> The WIP thread is archived here: >> https://marc.info/?t=155059539200004&r=1&w=2 >> >> >> Marc Gonzalez (3): >> PCI: qcom: Setup PCIE20_PARF_BDF_TRANSLATE_N >> arm64: dts: qcom: msm8998: Add PCIe SMMU node >> arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes >> >> arch/arm64/boot/dts/qcom/msm8998.dtsi | 93 ++++++++++++++++++++++++++ >> drivers/pci/controller/dwc/pcie-qcom.c | 4 ++ >> 2 files changed, 97 insertions(+) > > Marc, > > what's the plan with this series ? Please let me know so that > I can handle it correctly in the PCI patch queue, I am not > sure by reading comments it has evolved much since posting. Hello Lorenzo, You can ignore/drop this series, it has been superseded; FWIW, the latest patches no longer touch drivers/pci The hold-up was finding an acceptable work-around for the $&#! bug in qcom's SMMU emulation code. I hope Joerg will push it ASAP into linux-next so it can receive some testing before 5.3-rc1. The current incarnation of the PCIe PHY and RC nodes is: https://patchwork.kernel.org/patch/10895341/ Regards.
