Add support for GPIO based PERST# signal. GPIO number comes from per port PCIe device tree node. Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx> --- V3: Using helper function to get reset-gpios V2: Using standard "reset-gpio" property drivers/pci/controller/pci-tegra.c | 42 +++++++++++++++++++++++++----- 1 file changed, 36 insertions(+), 6 deletions(-) diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c index 06b99fcbf382..b021863303f1 100644 --- a/drivers/pci/controller/pci-tegra.c +++ b/drivers/pci/controller/pci-tegra.c @@ -17,6 +17,7 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/export.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/iopoll.h> #include <linux/irq.h> @@ -400,6 +401,8 @@ struct tegra_pcie_port { unsigned int lanes; struct phy **phys; + + struct gpio_desc *reset_gpiod; }; struct tegra_pcie_bus { @@ -583,15 +586,23 @@ static void tegra_pcie_port_reset(struct tegra_pcie_port *port) unsigned long value; /* pulse reset signal */ - value = afi_readl(port->pcie, ctrl); - value &= ~AFI_PEX_CTRL_RST; - afi_writel(port->pcie, value, ctrl); + if (port->reset_gpiod) { + gpiod_set_value(port->reset_gpiod, 0); + } else { + value = afi_readl(port->pcie, ctrl); + value &= ~AFI_PEX_CTRL_RST; + afi_writel(port->pcie, value, ctrl); + } usleep_range(1000, 2000); - value = afi_readl(port->pcie, ctrl); - value |= AFI_PEX_CTRL_RST; - afi_writel(port->pcie, value, ctrl); + if (port->reset_gpiod) { + gpiod_set_value(port->reset_gpiod, 1); + } else { + value = afi_readl(port->pcie, ctrl); + value |= AFI_PEX_CTRL_RST; + afi_writel(port->pcie, value, ctrl); + } } static void tegra_pcie_enable_rp_features(struct tegra_pcie_port *port) @@ -2238,6 +2249,7 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie) struct tegra_pcie_port *rp; unsigned int index; u32 value; + char *label; err = of_pci_get_devfn(port); if (err < 0) { @@ -2296,6 +2308,24 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie) if (IS_ERR(rp->base)) return PTR_ERR(rp->base); + label = kasprintf(GFP_KERNEL, "pex-reset-%u", index); + if (!label) { + dev_err(dev, "failed to create reset GPIO label\n"); + return -ENOMEM; + } + + rp->reset_gpiod = of_pci_get_reset_gpio(dev, port, + GPIOD_OUT_LOW, label); + kfree(label); + if (!rp->reset_gpiod) { + dev_dbg(dev, "missing optional reset-gpios prop\n"); + } else if (IS_ERR(rp->reset_gpiod)) { + err = PTR_ERR(rp->reset_gpiod); + rp->reset_gpiod = NULL; + dev_err(dev, "failed to get reset GPIO: %d\n", err); + return err; + } + list_add_tail(&rp->list, &pcie->ports); } -- 2.17.1