On Mon, Apr 29, 2019 at 10:38 AM Jarkko Nikula
<jarkko.nikula@xxxxxxxxxxxxxxx> wrote:
>
> On 4/29/19 10:45 AM, Benjamin Tissoires wrote:
> >> I would like to ask help from input subsystem experts what kind of SMBus
> >> power state dependency Synaptics RMI4 SMBus devices have since it cease
> >> to work if SMBus controllers idles between transfers and how this is
> >> best to fix?
> >
> > Hmm, I am not sure there is such an existing architecture you could
> > use in a simple patch.
> >
> > rmi-driver.c does indeed create an input device we could use to toggle
> > on/off the PM state, but those callbacks are not wired to the
> > transport driver (rmi_smbus.c), so it would required a little bit of
> > extra work. And then, there are other RMI4 functions (firmware
> > upgrade) that would not be happy if PM is in suspend while there is no
> > open input node.
> >
> I see.
>
> I got another thought about this. I noticed these input drivers need
> SMBus Host Notify, maybe that explain the PM dependency? If that's the
> only dependency then we could prevent the controller suspend if there is
> a client needing host notify mechanism. IMHO that's less hack than the
> patch to rmi_smbus.c.
So currently, AFAIK, only Synaptics (rmi4) and Elantech are using
SMBus Host Notify.
So this patch would prevent the same bugs for those 2 vendors, which is good.
It took me some time to understand why this would be less than a hack.
And indeed, given that Host Notify relies on the I2C connection to be
ready for the IRQ, we can not put the controller in suspend like we do
for others where the IRQ controller is still ready.
So yes, that could work from me. Not sure what Wolfram and Jean would
say though.
>
> Keijo: care to test does this idea would fix the issue (without the
> previous patch)? I also attached the diff.
>
> diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
> index 38af18645133..d54eafad7727 100644
> --- a/drivers/i2c/i2c-core-base.c
> +++ b/drivers/i2c/i2c-core-base.c
> @@ -327,6 +327,8 @@ static int i2c_device_probe(struct device *dev)
>
> if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
> dev_dbg(dev, "Using Host Notify IRQ\n");
> + /* Adapter should not suspend for Host Notify */
> + pm_runtime_get_sync(&client->adapter->dev);
> irq = i2c_smbus_host_notify_to_irq(client);
> } else if (dev->of_node) {
> irq = of_irq_get_byname(dev->of_node, "irq");
> @@ -431,6 +433,8 @@ static int i2c_device_remove(struct device *dev)
> device_init_wakeup(&client->dev, false);
>
> client->irq = client->init_irq;
> + if (client->flags & I2C_CLIENT_HOST_NOTIFY)
> + pm_runtime_put(&client->adapter->dev);
>
> return status;
> }
>
> > So I think this "hack" (with Mika's comments addressed) should go in
> > until someone starts propagating the PM states correctly.
> >
> I guess you mean the Rafael's pm_runtime_get_sync() comment?
Oops, yes, that one, sorry :)
Cheers,
Benjamin
