Hi Lorenzo,
On 11/04/19 8:33 PM, Lorenzo Pieralisi wrote:
> On Mon, Mar 25, 2019 at 03:09:33PM +0530, Kishon Vijay Abraham I wrote:
>> hook_fault_code is an ARM32 specific API for hooking into data abort.
>> Since pci-keystone.c will be used for AM65X platforms which is an
>> ARM64 platform,
>
> Hi Kishon,
>
> How is the problem plugged by the fault hook fixed on ARM64 ?
At least in AM654 platform, I don't see a bus error when PCIe device is not
connected but returns 0xffffffff. So there is no necessary for hook_fault_code
in AM654 platform.
Thanks
Kishon
>
> Thanks,
> Lorenzo
>
>> allow hook_fault_code to be compiled only for ARM32.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>> drivers/pci/controller/dwc/pci-keystone.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
>> index dfe54553d832..93296d434f40 100644
>> --- a/drivers/pci/controller/dwc/pci-keystone.c
>> +++ b/drivers/pci/controller/dwc/pci-keystone.c
>> @@ -710,6 +710,7 @@ static int ks_pcie_config_legacy_irq(struct keystone_pcie *ks_pcie)
>> return ret;
>> }
>>
>> +#ifdef CONFIG_ARM
>> /*
>> * When a PCI device does not exist during config cycles, keystone host gets a
>> * bus error instead of returning 0xffffffff. This handler always returns 0
>> @@ -729,6 +730,7 @@ static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
>>
>> return 0;
>> }
>> +#endif
>>
>> static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
>> {
>> @@ -778,12 +780,14 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
>> if (ret < 0)
>> return ret;
>>
>> +#ifdef CONFIG_ARM
>> /*
>> * PCIe access errors that result into OCP errors are caught by ARM as
>> * "External aborts"
>> */
>> hook_fault_code(17, ks_pcie_fault, SIGBUS, 0,
>> "Asynchronous external abort");
>> +#endif
>>
>> ks_pcie_start_link(pci);
>> dw_pcie_wait_for_link(pci);
>> --
>> 2.17.1
>>
