[PATCHv5 14/20] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>

The reset value of Primary, Secondary and Subordinate bus numbers is
zero, so set a workable value for these 3 bus numbers.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
Reviewed-by: Minghuan Lian <Minghuan.Lian@xxxxxxx>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx>
---
V5:
 - Corrected and retouched the subject and changelog.

 drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index db7ecb021c63..9210165fe8c0 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -582,6 +582,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 	u32 value, pab_ctrl, type;
 	struct resource_entry *win;
 
+	/* setup bus numbers */
+	value = csr_readl(pcie, PCI_PRIMARY_BUS);
+	value &= 0xff000000;
+	value |= 0x00ff0100;
+	csr_writel(pcie, value, PCI_PRIMARY_BUS);
+
 	/*
 	 * program Bus Master Enable Bit in Command Register in PAB Config
 	 * Space
-- 
2.17.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux