Re: [PATCH V5 6/6] PCI: rcar: Fix 64bit MSI message address handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/4/19 11:28 AM, Lorenzo Pieralisi wrote:
> On Tue, Apr 02, 2019 at 03:33:07AM +0200, marek.vasut@xxxxxxxxx wrote:
>> From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
>>
>> The MSI message address in the RC address space can be 64 bit. The
>> R-Car PCIe RC supports such a 64bit MSI message address as well.
>> The code currently uses virt_to_phys(__get_free_pages()) to obtain
>> a reserved page for the MSI message address, and the return value
>> of which can be a 64 bit physical address on 64 bit system.
>>
>> However, the driver only programs PCIEMSIALR register with the bottom
>> 32 bits of the virt_to_phys(__get_free_pages()) return value and does
>> not program the top 32 bits into PCIEMSIAUR, but rather programs the
>> PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car
>> SoCs, however may fail on new 64 bit R-Car SoCs.
>>
>> Since from a PCIe controller perspective, an inbound MSI is a memory
>> write to a special address (in case of this controller, defined by
>> the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but
>> never hits the DRAM _and_ because allocation of an MSI by a PCIe card
>> driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR
>> in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot
>> cause memory corruption or other issues.
>>
>> There is however the possibility that if virt_to_phys(__get_free_pages())
>> returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed
>> to 0x0 _and_ if the system had physical RAM at the address matching the
>> value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a
>> physical address matching the value of PCIEMSIALR and a remote write to
>> such a buffer by a PCIe card would trigger a spurious MSI.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
>> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>> Cc: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
>> Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
>> Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
>> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
>> To: linux-pci@xxxxxxxxxxxxxxx
>> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>> ---
>> V2: - s/it's/its/ in commit message
>>     - Add R-B from Geert
>> V3: - Reworded commit message and thus dropped Geerts R-B
>> V4: - Add Geert's R-B again
>> V5: - Rebase on next/master 20190401
>>     - Use {lower,upper}_32_bits() instead of >> 32
> 
> If that's the only reason you resent this series I will add the
> lower_32_bits() code myself.

Yes, you asked me to resend the whole series after the bot complained.

> Please do not rebase on top of next, apply code on top of a fixed -rc1
> (we are currently using v5.1-rc1) and if there are dependencies on code
> already queued do let us know, we will handle conflicts in next
> ourselves.

So do you want me to resend this one more time ?

-- 
Best regards,
Marek Vasut



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux