Re: [PATCH] pci/quirks: Add quirk to reset nvgpu at boot for the Lenovo ThinkPad P50

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, any update on this/do you guys need any more information here? Would very
much like to get this upstream

On Fri, 2019-03-22 at 06:30 -0500, Bjorn Helgaas wrote:
> On Thu, Mar 21, 2019 at 05:48:19PM -0500, Bjorn Helgaas wrote:
> > On Wed, Mar 13, 2019 at 06:25:02PM -0400, Lyude Paul wrote:
> > > On Fri, 2019-02-15 at 16:17 -0500, Lyude Paul wrote:
> > > > On Thu, 2019-02-14 at 18:43 -0600, Bjorn Helgaas wrote:
> > > > > On Tue, Feb 12, 2019 at 05:02:30PM -0500, Lyude Paul wrote:
> > > > > > On a very specific subset of ThinkPad P50 SKUs, particularly
> > > > > > ones that come with a Quadro M1000M chip instead of the M2000M
> > > > > > variant, the BIOS seems to have a very nasty habit of not
> > > > > > always resetting the secondary Nvidia GPU between full reboots
> > > > > > if the laptop is configured in Hybrid Graphics mode. The
> > > > > > reason for this happening is unknown, but the following steps
> > > > > > and possibly a good bit of patience will reproduce the issue:
> > > > > > 
> > > > > > 1. Boot up the laptop normally in Hybrid graphics mode
> > > > > > 2. Make sure nouveau is loaded and that the GPU is awake
> > > > > > 2. Allow the nvidia GPU to runtime suspend itself after being idle
> > > > > > 3. Reboot the machine, the more sudden the better (e.g sysrq-b may
> > > > > > help)
> > > > > > 4. If nouveau loads up properly, reboot the machine again and go
> > > > > > back to
> > > > > > step 2 until you reproduce the issue
> > > > > > 
> > > > > > This results in some very strange behavior: the GPU will quite
> > > > > > literally be left in exactly the same state it was in when the
> > > > > > previously booted kernel started the reboot. This has all
> > > > > > sorts of bad sideaffects: for starters, this completely breaks
> > > > > > nouveau starting with a mysterious EVO channel failure that
> > > > > > happens well before we've actually used the EVO channel for
> > > > > > anything:
> > 
> > Thanks for the hybrid tutorial (snipped from this response).  IIUC,
> > what you said was that in hybrid mode, the Intel GPU drives the
> > built-in display and the Nvidia GPU drives any external displays and
> > may be used for DRI PRIME rendering (whatever that is).  But since you
> > say the Nvidia device gets runtime suspended, I assume there's no
> > external display here and you're not using DRI PRIME.
> > 
> > I wonder if it's related to the fact that the Nvidia GPU has been
> > runtime suspended before you do the reboot.  Can you try turning of
> > runtime power management for the GPU by setting the runpm module
> > parameter to 0?  I *think* this would be booting with
> > "nouveau.runpm=0".
> 
> Sorry, I wasn't really thinking here.  You already *said* this is
> related to runtime suspend.  It only happens when the Nvidia GPU has
> been suspended.
> 
> I don't know that much about suspend, but ISTR seeing comments about
> resuming devices before we shutdown.  If we do that, maybe there's
> some kind of race between that resume and the reboot?
> 
> Bjorn
-- 
Cheers,
	Lyude Paul




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux