[PATCH v3 15/26] PCI: keystone: Invoke phy_reset API before enabling PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SERDES connected to the PCIe controller in AM654 requires
power on reset enable (POR_EN) to be set in the SERDES. The
SERDES driver sets POR_EN in the reset ops and it has to be
invoked before init or enable ops. In order for SERDES driver
to set POR_EN, invoke phy_reset API in pci-keystone driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 drivers/pci/controller/dwc/pci-keystone.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index a6a482bd648f..e4a816f53b8e 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -897,6 +897,10 @@ static int ks_pcie_enable_phy(struct keystone_pcie *ks_pcie)
 	int num_lanes = ks_pcie->num_lanes;
 
 	for (i = 0; i < num_lanes; i++) {
+		ret = phy_reset(ks_pcie->phy[i]);
+		if (ret < 0)
+			goto err_phy;
+
 		ret = phy_init(ks_pcie->phy[i]);
 		if (ret < 0)
 			goto err_phy;
-- 
2.17.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux