Re: [PATCH 1/3] PCI: rcar: Replace unsigned long with u32 for register values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/18/19 9:47 AM, Geert Uytterhoeven wrote:
> Hi Marek,
> 
> On Sun, Mar 17, 2019 at 1:06 AM <marek.vasut@xxxxxxxxx> wrote:
>> From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
>>
>> Replace unsigned long with u32 type for variables holding
>> register values, since the registers are 32bit. Note that
>> rcar_pcie_msi_irq() still uses unsigned long because both
>> find_first_bit() and __fls() require unsigned long as an
>> argument.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
>> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>> Cc: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
>> Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
>> Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
>> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
>> To: linux-pci@xxxxxxxxxxxxxxx
>> ---
>>  drivers/pci/controller/pcie-rcar.c | 10 +++++-----
>>  1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
>> index 1408c8aa758b..857d88fd03d5 100644
>> --- a/drivers/pci/controller/pcie-rcar.c
>> +++ b/drivers/pci/controller/pcie-rcar.c
>> @@ -169,7 +169,7 @@ enum {
>>
>>  static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
>>  {
>> -       int shift = 8 * (where & 3);
>> +       u32 shift = 8 * (where & 3);
> 
> shift is not a register value, so IMHO the original type is fine (the "int"
> comes from the pci_ops API, BTW).

I presume it should be at least unsigned ?

[...]

-- 
Best regards,
Marek Vasut



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux