RE: [PATCHv4 26/28] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

Thanks a lot for your comments!

> -----Original Message-----
> From: Bjorn Helgaas [mailto:helgaas@xxxxxxxxxx]
> Sent: 2019年3月12日 1:35
> To: Z.q. Hou <zhiqiang.hou@xxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; l.subrahmanya@xxxxxxxxxxxxxx;
> shawnguo@xxxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>;
> lorenzo.pieralisi@xxxxxxx; catalin.marinas@xxxxxxx;
> will.deacon@xxxxxxx; Mingkai Hu <mingkai.hu@xxxxxxx>; M.h. Lian
> <minghuan.lian@xxxxxxx>; Xiaowei Bao <xiaowei.bao@xxxxxxx>
> Subject: Re: [PATCHv4 26/28] PCI: mobiveil: ls_pcie_g4: add Workaround for
> A-011451
> 
> On Mon, Mar 11, 2019 at 09:33:32AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > When LX2 PCIe controller is sending multiple split completions and ACK
> > latency expires indicating that ACK should be send at priority.
> > But because of large number of split completions and FC update DLLP,
> > the controller does not give priority to ACK transmission. This
> > results into ACK latency timer timeout error at the link partner and
> > the pending TLPs are replayed by the link partner again.
> >
> > Workaround:
> > 1. Reduce the ACK latency timeout value to a very small value.
> > 2. Restrict the number of completions from the LX2 PCIe controller
> >    to 1, by changing the Max Read Request Size (MRRS) of link partner
> >    to the same value as Max Packet size (MPS).
> >
> > This patch implemented part 1, the part 2 can be set by kernel
> > parameter 'pci=pcie_bus_perf'
> 
> If I understand correctly, you're saying that LX2160A Rev1.0 will only work
> correctly if you have this patch applied AND you boot with
> "pci=pcie_bus_perf".
> 

Your understanding is correct.

> That might be OK if these rev 1.0 parts are only used in the lab and are never
> shipped to customers.  But if these parts are ever shipped to customers, I
> don't think it's acceptable for them to have to figure out that they must boot
> with "pci=pcie_bus_perf".  Yes, you can document that in release notes, but
> it's still a poor user experience, and users will forget, and they will see
> mysterious hard-to-debug issues.
> 
> Maybe there's a way for you to automatically set that pcie_bus_perf mode?
> With a dmesg note to indicate that you're overriding any mode the user may
> have selected?
> 

Actually we don't have a way to set the pcie_bus_perf automatically under Linux, we give this parameter in kernel cmdline.
Do you have any advice about how to set this parameter automatically under Linux?

> > This ERRATA is only for LX2160A Rev1.0, and it will be fixed in
> > Rev2.0.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> > ---
> > V4:
> >  - no change
> >
> >  .../pci/controller/mobiveil/pci-layerscape-gen4.c | 15 +++++++++++++++
> >  drivers/pci/controller/mobiveil/pcie-mobiveil.h   |  4 ++++
> >  2 files changed, 19 insertions(+)
> >
> > diff --git a/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> > b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> > index d2c5dbbd5e3c..20ce146788ca 100644
> > --- a/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> > +++ b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> > @@ -82,12 +82,27 @@ static bool ls_pcie_g4_is_bridge(struct ls_pcie_g4
> *pcie)
> >  	return header_type == PCI_HEADER_TYPE_BRIDGE;  }
> >
> > +static void workaround_A011451(struct ls_pcie_g4 *pcie) {
> > +	struct mobiveil_pcie *mv_pci = pcie->pci;
> > +	u32 val;
> > +
> > +	/* Set ACK latency timeout */
> > +	val = csr_readl(mv_pci, GPEX_ACK_REPLAY_TO);
> > +	val &= ~(ACK_LAT_TO_VAL_MASK << ACK_LAT_TO_VAL_SHIFT);
> > +	val |= (4 << ACK_LAT_TO_VAL_SHIFT);
> > +	csr_writel(mv_pci, val, GPEX_ACK_REPLAY_TO); }
> > +
> >  static int ls_pcie_g4_host_init(struct mobiveil_pcie *pci)  {
> >  	struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci);
> >
> >  	pcie->rev = csr_readb(pci, PCI_REVISION_ID);
> >
> > +	if (pcie->rev == REV_1_0)
> > +		workaround_A011451(pcie);
> > +
> >  	return 0;
> >  }
> >
> > diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > index ab43de5e4b2b..f0e2e4ae09b5 100644
> > --- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > +++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > @@ -85,6 +85,10 @@
> >  #define PAB_AXI_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x0bac,
> win)
> >  #define PAB_INTP_AXI_PIO_CLASS		0x474
> >
> > +#define GPEX_ACK_REPLAY_TO		0x438
> > +#define  ACK_LAT_TO_VAL_MASK		0x1fff
> > +#define  ACK_LAT_TO_VAL_SHIFT		0
> > +
> >  #define PAB_PEX_AMAP_CTRL(win)		PAB_REG_ADDR(0x4ba0,
> win)
> >  #define  AMAP_CTRL_EN_SHIFT		0
> >  #define  AMAP_CTRL_TYPE_SHIFT		1
> > --
> > 2.17.1
> >

Thanks,
Zhiqiang




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux