On Mon, 2019-02-25 at 15:25 +0100, Stefan Agner wrote:
> Define the length of the DBI registers and limit config space to its
> length. This makes sure that the kernel does not access registers
> beyond that point, avoiding the following abort on a i.MX 6Quad:
> # cat /sys/devices/soc0/soc/1ffc000.pcie/pci0000\:00/0000\:00\:00.0/config
> [ 100.021433] Unhandled fault: imprecise external abort (0x1406) at 0xb6ea7000
> ...
> [ 100.056423] PC is at dw_pcie_read+0x50/0x84
> [ 100.060790] LR is at dw_pcie_rd_own_conf+0x44/0x48
>
> +static void imx6_pcie_quirk(struct pci_dev *dev)
> +{
> + struct pci_bus *bus = dev->bus;
> + struct pcie_port *pp = bus->sysdata;
> +
> + if (bus->number == pp->root_bus_nr) {
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
> +
> + /*
> + * Limit config length to avoid the kernel reading beyond
> + * the register set and causing an abort on i.MX 6Quad
> + */
> + dev->cfg_size = imx6_pcie->drvdata->dbi_length;
> + }
> +}
> +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, imx6_pcie_quirk);
Are you sure that this quirk is only applied to imx6-pcie?
Superficially it looks like it would apply to all PCI roots and this
could be a problem on configs which enable all drivers, like arm64.
Maybe the linker magic inside DECLARE_PCI_FIXUP deals with that, in
that case I apologize.
--
Regards,
Leonard
