Hi Bjorn,
Am Montag, den 11.02.2019, 15:39 -0600 schrieb Bjorn Helgaas:
> On Wed, Feb 06, 2019 at 10:57:32AM +0100, Stefan Agner wrote:
> > Define the length of the DBI registers. This makes sure that
> > the kernel does not access registers beyond that point, avoiding
> > the following abort on a i.MX 6Quad:
> > # cat /sys/devices/soc0/soc/1ffc000.pcie/pci0000\:00/0000\:00\:00.0/config
> > [ 100.021433] Unhandled fault: imprecise external abort (0x1406) at 0xb6ea7000
> > ...
> > [ 100.056423] PC is at dw_pcie_read+0x50/0x84
> > [ 100.060790] LR is at dw_pcie_rd_own_conf+0x44/0x48
> > ...
>
> I assume this problem happens when using the pci_read_config() path or
> something similar?
>
> Could this be solved using pci_dev.cfg_size instead of building a new
> dwc-specific mechanism? There are some quirks that set dev->cfg_size
> to keep from reading past certain points in config space, e.g.,
> quirk_citrine(), quirk_nfp6000().
>
> I'm not necessarily opposed to doing it in dwc, but maybe there's some
> advantage in reducing the number of ways of doing the same thing.
This actually started out as a quirk changing the cfg size. But the
valid config space size seems to be different between root ports that
share the same (broken) device ID (Synopsys abcd), so I doubt that this
would be easier and/or any cleaner to implement as a quirk.
Regards,
Lucas
> > Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> > > > Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > ---
> > Changes in v3:
> > - Rebase on pci/dwc
> > Changes in v4:
> > - Rebase on pci/dwc
> > Changes in v5:
> > - Rebased ontop of pci/dwc
> > - Use DBI length of 0x200
> >
> > drivers/pci/controller/dwc/pci-imx6.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> > index c1d434ba3642..1ef7be1232f3 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -55,6 +55,7 @@ enum imx6_pcie_variants {
> > struct imx6_pcie_drvdata {
> > > > enum imx6_pcie_variants variant;
> > > > u32 flags;
> > > > + int dbi_length;
> > };
> >
> > struct imx6_pcie {
> > @@ -1087,6 +1088,8 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> > > > break;
> > > > }
> >
> > > > + pci->dbi_length = imx6_pcie->drvdata->dbi_length;
> > +
> > > > /* Grab turnoff reset */
> > > > imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
> > > > if (IS_ERR(imx6_pcie->turnoff_reset)) {
> > @@ -1170,6 +1173,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > > > .variant = IMX6Q,
> > > > .flags = IMX6_PCIE_FLAG_IMX6_PHY |
> > > > IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
> > > > + .dbi_length = 0x200,
> > > > },
> > > > [IMX6SX] = {
> > > > .variant = IMX6SX,
> > --
> > 2.20.1
> >
