On Tue, Jan 29, 2019 at 1:40 PM Z.q. Hou <zhiqiang.hou@xxxxxxx> wrote: > > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx> > > The reset value is all zero, so set a workable value for Primary, > Secondary and Subordinate bus numbers. > > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx> > Reviewed-by: Minghuan Lian <Minghuan.Lian@xxxxxxx> > --- > V3: > - No change > > drivers/pci/controller/pcie-mobiveil.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c > index db7ecb021c63..9210165fe8c0 100644 > --- a/drivers/pci/controller/pcie-mobiveil.c > +++ b/drivers/pci/controller/pcie-mobiveil.c > @@ -582,6 +582,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie) > u32 value, pab_ctrl, type; > struct resource_entry *win; > > + /* setup bus numbers */ > + value = csr_readl(pcie, PCI_PRIMARY_BUS); > + value &= 0xff000000; > + value |= 0x00ff0100; > + csr_writel(pcie, value, PCI_PRIMARY_BUS); > + > /* > * program Bus Master Enable Bit in Command Register in PAB Config > * Space > -- > 2.17.1 > Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx>
