Am Dienstag, den 05.02.2019, 00:17 +0000 schrieb Trent Piepho:
> This adds the PHY as a new node. The PCI-e controller node gains a
> phandle property that points to it.
>
> There isn't yet any code in the kernel that uses this device's
> registers, but it will be added for a PCIe PLL erratum workaround.
>
> Signed-off-by: Trent Piepho <tpiepho@xxxxxxxxxx>
Looks good, but needs an Ack on the binding change. Also this should go
through Shawns tree, so needs to be split out from the series.
Regards,
Lucas
> ---
> arch/arm/boot/dts/imx7d.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 6b298e388f4b..6eb98e7c568d 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -96,6 +96,14 @@
> > };
> };
>
> +&aips2 {
> + pcie_phy: pcie-phy@306d0000 {
> + compatible = "fsl,imx7d-pcie-phy";
> + reg = <0x306d0000 0x10000>;
> + status = "disabled";
> + };
> +};
> +
> &aips3 {
> usbotg2: usb@30b20000 {
> compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
> @@ -173,6 +181,7 @@
> <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
> <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
> reset-names = "pciephy", "apps", "turnoff";
> + fsl,imx7d-pcie-phy = <&pcie_phy>;
> status = "disabled";
> };
> };
