Converted bridge code to a platform driver using the PCI generic driver
framework and use adding platform devices during xtalk scan. This allows
easier sharing bridge drvier for other SGI platforms like IP30 (Octane) and
IP35 (Origin 3k, Fuel, Tezro).
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
---
arch/mips/Kconfig | 2 +
arch/mips/include/asm/pci/bridge.h | 6 +-
arch/mips/include/asm/xtalk/xtalk.h | 9 -
arch/mips/pci/Makefile | 1 -
arch/mips/pci/pci-ip27.c | 214 ---------------
arch/mips/sgi-ip27/ip27-init.c | 2 +
arch/mips/sgi-ip27/ip27-xtalk.c | 31 ++-
drivers/pci/controller/Kconfig | 3 +
drivers/pci/controller/Makefile | 1 +
.../pci/controller/pci-xtalk-bridge.c | 288 +++++++++++++++++----
include/linux/platform_data/xtalk-bridge.h | 17 ++
11 files changed, 286 insertions(+), 288 deletions(-)
delete mode 100644 arch/mips/pci/pci-ip27.c
rename arch/mips/pci/ops-bridge.c => drivers/pci/controller/pci-xtalk-bridge.c (51%)
create mode 100644 include/linux/platform_data/xtalk-bridge.h
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7d7f5d79af41..f2f258abee59 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -678,6 +678,8 @@ config SGI_IP27
select HAVE_PCI
select IRQ_MIPS_CPU
select NR_CPUS_DEFAULT_64
+ select PCI_DRIVERS_GENERIC
+ select PCI_XTALK_BRIDGE
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index 1fc60b1ae349..af2da166815e 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -816,15 +816,13 @@ struct bridge_err_cmdword {
#define PCI64_ATTR_RMF_SHFT 48
struct bridge_controller {
- struct pci_controller pc;
struct resource mem;
struct resource io;
struct resource busn;
struct bridge_regs *base;
- nasid_t nasid;
- unsigned int widget_id;
u64 baddr;
unsigned int pci_int[8];
+ nasid_t nasid;
};
#define BRIDGE_CONTROLLER(bus) \
@@ -839,6 +837,4 @@ struct bridge_controller {
extern int request_bridge_irq(struct bridge_controller *bc, int pin);
-extern struct pci_ops bridge_pci_ops;
-
#endif /* _ASM_PCI_BRIDGE_H */
diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h
index 26d2ed1fa917..680e7efebbaf 100644
--- a/arch/mips/include/asm/xtalk/xtalk.h
+++ b/arch/mips/include/asm/xtalk/xtalk.h
@@ -47,15 +47,6 @@ typedef struct xtalk_piomap_s *xtalk_piomap_t;
#define XIO_PORT(x) ((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
#define XIO_PACK(p, o) ((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
-#ifdef CONFIG_PCI
-extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
-#else
-static inline int bridge_probe(nasid_t nasid, int widget, int masterwid)
-{
- return 0;
-}
-#endif
-
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_XTALK_XTALK_H */
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 8185a2bfaf09..0225d83d6681 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
deleted file mode 100644
index 3c177b4d0609..000000000000
--- a/arch/mips/pci/pci-ip27.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Christoph Hellwig (hch@xxxxxx)
- * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@xxxxxxxxxxxxxx)
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/dma-direct.h>
-#include <asm/sn/arch.h>
-#include <asm/pci/bridge.h>
-#include <asm/paccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
-
-/*
- * Max #PCI busses we can handle; ie, max #PCI bridges.
- */
-#define MAX_PCI_BUSSES 40
-
-/*
- * XXX: No kmalloc available when we do our crosstalk scan,
- * we should try to move it later in the boot process.
- */
-static struct bridge_controller bridges[MAX_PCI_BUSSES];
-
-extern struct pci_ops bridge_pci_ops;
-
-int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
-{
- unsigned long offset = NODE_OFFSET(nasid);
- struct bridge_controller *bc;
- static int num_bridges = 0;
- int slot;
-
- pci_set_flags(PCI_PROBE_ONLY);
-
- printk("a bridge\n");
-
- /* XXX: kludge alert.. */
- if (!num_bridges)
- ioport_resource.end = ~0UL;
-
- bc = &bridges[num_bridges];
-
- bc->pc.pci_ops = &bridge_pci_ops;
- bc->pc.mem_resource = &bc->mem;
- bc->pc.io_resource = &bc->io;
-
- bc->pc.index = num_bridges;
-
- bc->mem.name = "Bridge PCI MEM";
- bc->pc.mem_offset = offset;
- bc->mem.start = 0;
- bc->mem.end = ~0UL;
- bc->mem.flags = IORESOURCE_MEM;
-
- bc->io.name = "Bridge IO MEM";
- bc->pc.io_offset = offset;
- bc->io.start = 0UL;
- bc->io.end = ~0UL;
- bc->io.flags = IORESOURCE_IO;
-
- bc->widget_id = widget_id;
- bc->nasid = nasid;
-
- bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR;
-
- /*
- * point to this bridge
- */
- bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(nasid, widget_id);
-
- /*
- * Clear all pending interrupts.
- */
- bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
-
- /*
- * Until otherwise set up, assume all interrupts are from slot 0
- */
- bridge_write(bc, b_int_device, 0x0);
-
- /*
- * swap pio's to pci mem and io space (big windows)
- */
- bridge_set(bc, b_wid_control, BRIDGE_CTRL_IO_SWAP |
- BRIDGE_CTRL_MEM_SWAP);
-#ifdef CONFIG_PAGE_SIZE_4KB
- bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#else /* 16kB or larger */
- bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#endif
-
- /*
- * Hmm... IRIX sets additional bits in the address which
- * are documented as reserved in the bridge docs.
- */
- bridge_write(bc, b_wid_int_upper, 0x8000 | (masterwid << 16));
- bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/
- bridge_write(bc, b_dir_map, (masterwid << 20)); /* DMA */
- bridge_write(bc, b_int_enable, 0);
-
- for (slot = 0; slot < 8; slot ++) {
- bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
- bc->pci_int[slot] = -1;
- }
- bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
-
- register_pci_controller(&bc->pc);
-
- num_bridges++;
-
- return 0;
-}
-
-/*
- * All observed requests have pin == 1. We could have a global here, that
- * gets incremented and returned every time - unfortunately, pci_map_irq
- * may be called on the same device over and over, and need to return the
- * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
- *
- * A given PCI device, in general, should be able to intr any of the cpus
- * on any one of the hubs connected to its xbow.
- */
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return 0;
-}
-
-static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
-{
- while (dev->bus->parent) {
- /* Move up the chain of bridges. */
- dev = dev->bus->self;
- }
-
- return dev;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- struct pci_dev *rdev = bridge_root_dev(dev);
- int slot = PCI_SLOT(rdev->devfn);
- int irq;
-
- irq = bc->pci_int[slot];
- if (irq == -1) {
- irq = request_bridge_irq(bc, slot);
- if (irq < 0)
- return irq;
-
- bc->pci_int[slot] = irq;
- }
- dev->irq = irq;
-
- return 0;
-}
-
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
-
- return bc->baddr + paddr;
-}
-
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
- return dma_addr & ~(0xffUL << 56);
-}
-
-/*
- * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses
- * to find the slot number in sense of the bridge device register.
- * XXX This also means multiple devices might rely on conflicting bridge
- * settings.
- */
-
-static inline void pci_disable_swapping(struct pci_dev *dev)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- struct bridge_regs *bridge = bc->base;
- int slot = PCI_SLOT(dev->devfn);
-
- /* Turn off byte swapping */
- bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;
- bridge->b_widget.w_tflush; /* Flush */
-}
-
-static void pci_fixup_ioc3(struct pci_dev *d)
-{
- pci_disable_swapping(d);
-}
-
-#ifdef CONFIG_NUMA
-int pcibus_to_node(struct pci_bus *bus)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
-
- return bc->nasid;
-}
-EXPORT_SYMBOL(pcibus_to_node);
-#endif /* CONFIG_NUMA */
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
- pci_fixup_ioc3);
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 395c4aff9493..752c7ada3abd 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -192,5 +192,7 @@ void __init plat_mem_setup(void)
ioc3_eth_init();
per_cpu_init();
+ ioport_resource.end = 0;
+ ioport_resource.end = ~0UL;
set_io_port_base(IO_BASE);
}
diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c
index ce06aaa115ae..8579b651d862 100644
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@@ -9,6 +9,8 @@
#include <linux/kernel.h>
#include <linux/smp.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/xtalk-bridge.h>
#include <asm/sn/types.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/hub.h>
@@ -20,7 +22,19 @@
#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbow in Xbridge */
#define BASE_XBOW_PORT 8 /* Lowest external port */
-extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
+static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
+{
+ struct platform_device *pdev;
+ struct xtalk_bridge_platform_data bridge_data;
+
+ pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
+ bridge_data.nasid = nasid;
+ bridge_data.widget = widget;
+ bridge_data.masterwid = masterwid;
+ platform_device_add_data(pdev, &bridge_data, sizeof(bridge_data));
+ platform_device_add(pdev);
+ pr_info("xtalk:n%d/%x bridge widget\n", nasid, widget);
+}
static int probe_one_port(nasid_t nasid, int widget, int masterwid)
{
@@ -31,13 +45,10 @@ static int probe_one_port(nasid_t nasid, int widget, int masterwid)
(RAW_NODE_SWIN_BASE(nasid, widget) + WIDGET_ID);
partnum = XWIDGET_PART_NUM(widget_id);
- printk(KERN_INFO "Cpu %d, Nasid 0x%x, widget 0x%x (partnum 0x%x) is ",
- smp_processor_id(), nasid, widget, partnum);
-
switch (partnum) {
case BRIDGE_WIDGET_PART_NUM:
case XBRIDGE_WIDGET_PART_NUM:
- bridge_probe(nasid, widget, masterwid);
+ bridge_platform_create(nasid, widget, masterwid);
break;
default:
break;
@@ -52,8 +63,6 @@ static int xbow_probe(nasid_t nasid)
klxbow_t *xbow_p;
unsigned masterwid, i;
- printk("is xbow\n");
-
/*
* found xbow, so may have multiple bridges
* need to probe xbow
@@ -117,19 +126,17 @@ static void xtalk_probe_node(cnodeid_t nid)
(RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID);
partnum = XWIDGET_PART_NUM(widget_id);
- printk(KERN_INFO "Cpu %d, Nasid 0x%x: partnum 0x%x is ",
- smp_processor_id(), nasid, partnum);
-
switch (partnum) {
case BRIDGE_WIDGET_PART_NUM:
- bridge_probe(nasid, 0x8, 0xa);
+ bridge_platform_create(nasid, 0x8, 0xa);
break;
case XBOW_WIDGET_PART_NUM:
case XXBOW_WIDGET_PART_NUM:
+ pr_info("xtalk:n%d/0 xbow widget\n", nasid);
xbow_probe(nasid);
break;
default:
- printk(" unknown widget??\n");
+ pr_info("xtalk:n%d/0 unknown widget (0x%x)\n", nasid, partnum);
break;
}
}
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 6671946dbf66..c3815353f2f8 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -265,6 +265,9 @@ config PCIE_TANGO_SMP8759
This can lead to data corruption if drivers perform concurrent
config and MMIO accesses.
+config PCI_XTALK_BRIDGE
+ bool
+
config VMD
depends on PCI_MSI && X86_64 && SRCU
tristate "Intel Volume Management Device Driver"
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index d56a507495c5..bcbd740f878c 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
+obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o
obj-$(CONFIG_VMD) += vmd.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
diff --git a/arch/mips/pci/ops-bridge.c b/drivers/pci/controller/pci-xtalk-bridge.c
similarity index 51%
rename from arch/mips/pci/ops-bridge.c
rename to drivers/pci/controller/pci-xtalk-bridge.c
index df95b0da08f2..b90fbec8f891 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/drivers/pci/controller/pci-xtalk-bridge.c
@@ -3,13 +3,21 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1999, 2000, 04, 06 Ralf Baechle (ralf@xxxxxxxxxxxxxx)
+ * Copyright (C) 2003 Christoph Hellwig (hch@xxxxxx)
+ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@xxxxxxxxxxxxxx)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
+#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
-#include <asm/paccess.h>
-#include <asm/pci/bridge.h>
+#include <linux/smp.h>
+#include <linux/dma-direct.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/xtalk-bridge.h>
+
#include <asm/sn/arch.h>
+#include <asm/pci/bridge.h>
+#include <asm/paccess.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn0/hub.h>
@@ -29,6 +37,20 @@ static u32 emulate_ioc3_cfg(int where, int size)
return 0;
}
+static void bridge_disable_swapping(struct pci_dev *dev)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ int slot = PCI_SLOT(dev->devfn);
+
+ /* Turn off byte swapping */
+ bridge_clr(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+ bridge_read(bc, b_widget.w_tflush); /* Flush */
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+ bridge_disable_swapping);
+
+
/*
* The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
* not really documented, so right now I can't write code which uses it.
@@ -39,20 +61,19 @@ static u32 emulate_ioc3_cfg(int where, int size)
* which is used in SGI systems. The IOC3 can only handle 32-bit PCI
* accesses and does only decode parts of it's address space.
*/
-
static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
+ int where, int size, u32 *value)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
struct bridge_regs *bridge = bc->base;
int slot = PCI_SLOT(devfn);
int fn = PCI_FUNC(devfn);
- volatile void *addr;
+ void *addr;
u32 cf, shift, mask;
int res;
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
@@ -65,11 +86,11 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
if (size == 1)
- res = get_dbe(*value, (u8 *) addr);
+ res = get_dbe(*value, (u8 *)addr);
else if (size == 2)
- res = get_dbe(*value, (u16 *) addr);
+ res = get_dbe(*value, (u16 *)addr);
else
- res = get_dbe(*value, (u32 *) addr);
+ res = get_dbe(*value, (u32 *)addr);
return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
@@ -84,8 +105,7 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
}
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = ((where & 3) << 3);
@@ -96,20 +116,20 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
}
static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
+ int where, int size, u32 *value)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
struct bridge_regs *bridge = bc->base;
int busno = bus->number;
int slot = PCI_SLOT(devfn);
int fn = PCI_FUNC(devfn);
- volatile void *addr;
+ void *addr;
u32 cf, shift, mask;
int res;
bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
@@ -119,15 +139,14 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
goto is_ioc3;
- bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
if (size == 1)
- res = get_dbe(*value, (u8 *) addr);
+ res = get_dbe(*value, (u8 *)addr);
else if (size == 2)
- res = get_dbe(*value, (u16 *) addr);
+ res = get_dbe(*value, (u16 *)addr);
else
- res = get_dbe(*value, (u32 *) addr);
+ res = get_dbe(*value, (u32 *)addr);
return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
@@ -141,10 +160,8 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
return PCIBIOS_SUCCESSFUL;
}
- bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
-
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = ((where & 3) << 3);
@@ -155,7 +172,7 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
}
static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * value)
+ int where, int size, u32 *value)
{
if (!pci_is_root_bus(bus))
return pci_conf1_read_config(bus, devfn, where, size, value);
@@ -170,12 +187,12 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
struct bridge_regs *bridge = bc->base;
int slot = PCI_SLOT(devfn);
int fn = PCI_FUNC(devfn);
- volatile void *addr;
+ void *addr;
u32 cf, shift, mask, smask;
int res;
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
@@ -187,13 +204,12 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
- if (size == 1) {
- res = put_dbe(value, (u8 *) addr);
- } else if (size == 2) {
- res = put_dbe(value, (u16 *) addr);
- } else {
- res = put_dbe(value, (u32 *) addr);
- }
+ if (size == 1)
+ res = put_dbe(value, (u8 *)addr);
+ else if (size == 2)
+ res = put_dbe(value, (u16 *)addr);
+ else
+ res = put_dbe(value, (u32 *)addr);
if (res)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -210,7 +226,7 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = ((where & 3) << 3);
@@ -218,7 +234,7 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
smask = mask << shift;
cf = (cf & ~smask) | ((value & mask) << shift);
- if (put_dbe(cf, (u32 *) addr))
+ if (put_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
return PCIBIOS_SUCCESSFUL;
@@ -232,13 +248,13 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
int slot = PCI_SLOT(devfn);
int fn = PCI_FUNC(devfn);
int busno = bus->number;
- volatile void *addr;
+ void *addr;
u32 cf, shift, mask, smask;
int res;
bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
@@ -250,13 +266,12 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
- if (size == 1) {
- res = put_dbe(value, (u8 *) addr);
- } else if (size == 2) {
- res = put_dbe(value, (u16 *) addr);
- } else {
- res = put_dbe(value, (u32 *) addr);
- }
+ if (size == 1)
+ res = put_dbe(value, (u8 *)addr);
+ else if (size == 2)
+ res = put_dbe(value, (u16 *)addr);
+ else
+ res = put_dbe(value, (u32 *)addr);
if (res)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -272,8 +287,7 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
return PCIBIOS_SUCCESSFUL;
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
- if (get_dbe(cf, (u32 *) addr))
+ if (get_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = ((where & 3) << 3);
@@ -281,7 +295,7 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
smask = mask << shift;
cf = (cf & ~smask) | ((value & mask) << shift);
- if (put_dbe(cf, (u32 *) addr))
+ if (put_dbe(cf, (u32 *)addr))
return PCIBIOS_DEVICE_NOT_FOUND;
return PCIBIOS_SUCCESSFUL;
@@ -296,7 +310,187 @@ static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
return pci_conf0_write_config(bus, devfn, where, size, value);
}
-struct pci_ops bridge_pci_ops = {
+static struct pci_ops bridge_pci_ops = {
.read = pci_read_config,
.write = pci_write_config,
};
+
+#ifdef CONFIG_NUMA
+int pcibus_to_node(struct pci_bus *bus)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+
+ return bc->nasid;
+}
+EXPORT_SYMBOL(pcibus_to_node);
+#endif /* CONFIG_NUMA */
+
+/*
+ * All observed requests have pin == 1. We could have a global here, that
+ * gets incremented and returned every time - unfortunately, pci_map_irq
+ * may be called on the same device over and over, and need to return the
+ * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
+ *
+ * A given PCI device, in general, should be able to intr any of the cpus
+ * on any one of the hubs connected to its xbow.
+ */
+static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+ int irq;
+
+ irq = bc->pci_int[slot];
+ if (irq == -1) {
+ irq = request_bridge_irq(bc, slot);
+ if (irq < 0)
+ return irq;
+
+ bc->pci_int[slot] = irq;
+ }
+ return irq;
+}
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
+
+ return bc->baddr + paddr;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+ return dma_addr & ~(0xffUL << 56);
+}
+
+static int bridge_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bridge_controller *bc;
+ struct pci_host_bridge *host;
+ unsigned long offset;
+ int slot;
+ int err;
+ struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev);
+
+ offset = NODE_OFFSET(bd->nasid);
+
+ pci_set_flags(PCI_PROBE_ONLY);
+
+ host = devm_pci_alloc_host_bridge(dev, sizeof(*bc));
+ if (!host)
+ return -ENOMEM;
+
+ bc = pci_host_bridge_priv(host);
+
+ bc->mem.name = "Bridge PCI MEM";
+ bc->mem.start = offset + (bd->widget << SWIN_SIZE_BITS);
+ bc->mem.end = bc->mem.start + SWIN_SIZE;
+ bc->mem.flags = IORESOURCE_MEM;
+
+ bc->io.name = "Bridge PCI IO";
+ bc->io.start = offset + (bd->widget << SWIN_SIZE_BITS);
+ bc->io.end = bc->io.start + SWIN_SIZE;
+ bc->io.flags = IORESOURCE_IO;
+
+ bc->busn.name = "Bridge PCI busn";
+ bc->busn.start = 0;
+ bc->busn.end = 0xff;
+ bc->busn.flags = IORESOURCE_BUS;
+
+ pci_add_resource_offset(&host->windows, &bc->mem, offset);
+ pci_add_resource_offset(&host->windows, &bc->io, offset);
+ pci_add_resource(&host->windows, &bc->busn);
+
+ err = devm_request_pci_bus_resources(dev, &host->windows);
+ if (err < 0) {
+ pci_free_resource_list(&host->windows);
+ return err;
+ }
+
+ bc->nasid = bd->nasid;
+
+ bc->baddr = (u64)bd->masterwid << 60 | PCI64_ATTR_BAR;
+
+ /*
+ * point to this bridge
+ */
+ bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(bd->nasid,
+ bd->widget);
+
+ /*
+ * Clear all pending interrupts.
+ */
+ bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
+
+ /*
+ * Until otherwise set up, assume all interrupts are from slot 0
+ */
+ bridge_write(bc, b_int_device, 0x0);
+
+ /*
+ * disable swapping for big windows
+ */
+ bridge_clr(bc, b_wid_control,
+ BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP);
+#ifdef CONFIG_PAGE_SIZE_4KB
+ bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
+#else /* 16kB or larger */
+ bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
+#endif
+
+ /*
+ * Hmm... IRIX sets additional bits in the address which
+ * are documented as reserved in the bridge docs.
+ */
+ bridge_write(bc, b_wid_int_upper, 0x8000 | (bd->masterwid << 16));
+ bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/
+ bridge_write(bc, b_dir_map, (bd->masterwid << 20)); /* DMA */
+ bridge_write(bc, b_int_enable, 0);
+
+ for (slot = 0; slot < 8; slot++) {
+ bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+ bc->pci_int[slot] = -1;
+ }
+ bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
+
+ host->dev.parent = dev;
+ host->sysdata = bc;
+ host->busnr = 0;
+ host->ops = &bridge_pci_ops;
+ host->map_irq = bridge_map_irq;
+ host->swizzle_irq = pci_common_swizzle;
+
+ err = pci_scan_root_bus_bridge(host);
+ if (err < 0)
+ return err;
+
+ pci_bus_claim_resources(host->bus);
+ pci_bus_add_devices(host->bus);
+
+ platform_set_drvdata(pdev, host->bus);
+
+ return 0;
+}
+
+static int bridge_remove(struct platform_device *pdev)
+{
+ struct pci_bus *bus = platform_get_drvdata(pdev);
+
+ pci_lock_rescan_remove();
+ pci_stop_root_bus(bus);
+ pci_remove_root_bus(bus);
+ pci_unlock_rescan_remove();
+
+ return 0;
+}
+
+static struct platform_driver bridge_driver = {
+ .probe = bridge_probe,
+ .remove = bridge_remove,
+ .driver = {
+ .name = "xtalk-bridge",
+ }
+};
+
+builtin_platform_driver(bridge_driver);
diff --git a/include/linux/platform_data/xtalk-bridge.h b/include/linux/platform_data/xtalk-bridge.h
new file mode 100644
index 000000000000..818d4b457429
--- /dev/null
+++ b/include/linux/platform_data/xtalk-bridge.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * SGI PCI Xtalk Bridge
+ */
+
+#ifndef PLATFORM_DATA_XTALK_BRIDGE_H
+#define PLATFORM_DATA_XTALK_BRIDGE_H
+
+#include <asm/sn/types.h>
+
+struct xtalk_bridge_platform_data {
+ nasid_t nasid;
+ int widget;
+ int masterwid;
+};
+
+#endif /* PLATFORM_DATA_XTALK_BRIDGE_H */
--
2.13.7
