Re: [PATCHv5 3/4] pci: layerscape: Add the EP mode support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Xiaowei,

On 21/01/19 3:14 PM, Xiaowei Bao wrote:
> Add the PCIe EP mode support for layerscape platform.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> Reviewed-by: Minghuan Lian <minghuan.lian@xxxxxxx>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@xxxxxxx>

This patch looks good to me, except for using epc->features which I've tried to
get rid of in [1]. After Lorenzo's review, one of us have to change it to the
new design.

Thanks
Kishon

[1] -> https://patchwork.kernel.org/project/linux-pci/list/?series=66177
> ---
> v2:
>  - remove the EP mode check function.
> v3:
>  - modif the return value when enter default case.
> v4:
>  - no change.
> v5:
>  - no change.
> 
>  drivers/pci/controller/dwc/Makefile            |    2 +-
>  drivers/pci/controller/dwc/pci-layerscape-ep.c |  146 ++++++++++++++++++++++++
>  2 files changed, 147 insertions(+), 1 deletions(-)
>  create mode 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
> 
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index 7bcdcdf..b5f3b83 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
>  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
>  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
>  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
>  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> new file mode 100644
> index 0000000..dafb528
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -0,0 +1,146 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe controller EP driver for Freescale Layerscape SoCs
> + *
> + * Copyright (C) 2018 NXP Semiconductor.
> + *
> + * Author: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +
> +#include "pcie-designware.h"
> +
> +#define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> +
> +struct ls_pcie_ep {
> +	struct dw_pcie		*pci;
> +};
> +
> +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> +
> +static int ls_pcie_establish_link(struct dw_pcie *pci)
> +{
> +	return 0;
> +}
> +
> +static const struct dw_pcie_ops ls_pcie_ep_ops = {
> +	.start_link = ls_pcie_establish_link,
> +};
> +
> +static const struct of_device_id ls_pcie_ep_of_match[] = {
> +	{ .compatible = "fsl,ls-pcie-ep",},
> +	{ },
> +};
> +
> +static void ls_pcie_ep_init(struct dw_pcie_ep *ep)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	struct pci_epc *epc = ep->epc;
> +	enum pci_barno bar;
> +
> +	for (bar = BAR_0; bar <= BAR_5; bar++)
> +		dw_pcie_ep_reset_bar(pci, bar);
> +
> +	epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER;
> +}
> +
> +static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> +				  enum pci_epc_irq_type type, u16 interrupt_num)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> +	switch (type) {
> +	case PCI_EPC_IRQ_LEGACY:
> +		return dw_pcie_ep_raise_legacy_irq(ep, func_no);
> +	case PCI_EPC_IRQ_MSI:
> +		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> +	case PCI_EPC_IRQ_MSIX:
> +		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> +	default:
> +		dev_err(pci->dev, "UNKNOWN IRQ type\n");
> +		return -EINVAL;
> +	}
> +}
> +
> +static struct dw_pcie_ep_ops pcie_ep_ops = {
> +	.ep_init = ls_pcie_ep_init,
> +	.raise_irq = ls_pcie_ep_raise_irq,
> +};
> +
> +static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> +					struct platform_device *pdev)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +	struct device *dev = pci->dev;
> +	struct dw_pcie_ep *ep;
> +	struct resource *res;
> +	int ret;
> +
> +	ep = &pci->ep;
> +	ep->ops = &pcie_ep_ops;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> +	if (!res)
> +		return -EINVAL;
> +
> +	ep->phys_base = res->start;
> +	ep->addr_size = resource_size(res);
> +
> +	ret = dw_pcie_ep_init(ep);
> +	if (ret) {
> +		dev_err(dev, "failed to initialize endpoint\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __init ls_pcie_ep_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct dw_pcie *pci;
> +	struct ls_pcie_ep *pcie;
> +	struct resource *dbi_base;
> +	int ret;
> +
> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> +	if (!pci)
> +		return -ENOMEM;
> +
> +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> +	if (IS_ERR(pci->dbi_base))
> +		return PTR_ERR(pci->dbi_base);
> +
> +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> +	pci->dev = dev;
> +	pci->ops = &ls_pcie_ep_ops;
> +	pcie->pci = pci;
> +
> +	platform_set_drvdata(pdev, pcie);
> +
> +	ret = ls_add_pcie_ep(pcie, pdev);
> +
> +	return ret;
> +}
> +
> +static struct platform_driver ls_pcie_ep_driver = {
> +	.driver = {
> +		.name = "layerscape-pcie-ep",
> +		.of_match_table = ls_pcie_ep_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +};
> +builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux