Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 07, 2019 at 09:01:29PM -0700, Jason Gunthorpe wrote:
> On Sun, Jan 06, 2019 at 09:43:46AM +1100, Benjamin Herrenschmidt wrote:
> > On Sat, 2019-01-05 at 10:51 -0700, Jason Gunthorpe wrote:
> > >
> > > > Interesting.  I've investigated this further, though I don't have as
> > > > many new clues as I'd like.  The problem occurs reliably, at least on
> > > > one particular type of machine (a POWER8 "Garrison" with ConnectX-4).
> > > > I don't yet know if it occurs with other machines, I'm having trouble
> > > > getting access to other machines with a suitable card.  I didn't
> > > > manage to reproduce it on a different POWER8 machine with a
> > > > ConnectX-5, but I don't know if it's the difference in machine or
> > > > difference in card revision that's important.
> > >
> > > Make sure the card has the latest firmware is always good advice..
> > >
> > > > So possibilities that occur to me:
> > > >   * It's something specific about how the vfio-pci driver uses D3
> > > >     state - have you tried rebinding your device to vfio-pci?
> > > >   * It's something specific about POWER, either the kernel or the PCI
> > > >     bridge hardware
> > > >   * It's something specific about this particular type of machine
> > >
> > > Does the EEH indicate what happend to actually trigger it?
> >
> > In a very cryptic way that requires manual parsing using non-public
> > docs sadly but yes. From the look of it, it's a completion timeout.
> >
> > Looks to me like we don't get a response to a config space access
> > during the change of D state. I don't know if it's the write of the D3
> > state itself or the read back though (it's probably detected on the
> > read back or a subsequent read, but that doesn't tell me which specific
> > one failed).
>
> If it is just one card doing it (again, check you have latest
> firmware) I wonder if it is a sketchy PCI-E electrical link that is
> causing a long re-training cycle? Can you tell if the PCI-E link is
> permanently gone or does it eventually return?
>
> Does the card work in Gen 3 when it starts? Is there any indication of
> PCI-E link errors?
>
> Everytime or sometimes?
>
> POWER 8 firmware is good? If the link does eventually come back, is
> the POWER8's D3 resumption timeout long enough?
>
> If this doesn't lead to an obvious conclusion you'll probably need to
> connect to IBM's Mellanox support team to get more information from
> the card side.

+1, I tried to find any Mellanox-internal bugs related to your issue
and didn't find anything concrete.

Thanks

>
> Jason

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux