Re: [PATCH v7 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2018/12/14 0:34, Lorenzo Pieralisi wrote:
> On Thu, Dec 06, 2018 at 08:02:38PM +0800, Hanjie Lin wrote:
>> From: Yue Wang <yue.wang@xxxxxxxxxxx>
>>
>> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
>> PCI core. This patch adds the driver support for Meson PCIe controller.
>>
>> Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
>> Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
>> ---
>>  MAINTAINERS                            |   7 +
>>  drivers/pci/controller/dwc/Kconfig     |  10 +
>>  drivers/pci/controller/dwc/Makefile    |   1 +
>>  drivers/pci/controller/dwc/pci-meson.c | 603 +++++++++++++++++++++++++++++++++
>>  4 files changed, 621 insertions(+)
>>  create mode 100644 drivers/pci/controller/dwc/pci-meson.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 7fe120f..21ed916 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -11600,6 +11600,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
>>  S:	Supported
>>  F:	drivers/pci/controller/
>>  
>> +PCIE DRIVER FOR AMLOGIC MESON
>> +M:	Yue Wang <yue.wang@xxxxxxxxxxx>
>> +L:	linux-pci@xxxxxxxxxxxxxxx
>> +L:	linux-amlogic@xxxxxxxxxxxxxxxxxxx
>> +S:	Maintained
>> +F:	drivers/pci/controller/dwc/pci-meson.c
>> +
>>  PCIE DRIVER FOR AXIS ARTPEC
>>  M:	Jesper Nilsson <jesper.nilsson@xxxxxxxx>
>>  L:	linux-arm-kernel@xxxxxxxx
>> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
>> index 91b0194..7800322 100644
>> --- a/drivers/pci/controller/dwc/Kconfig
>> +++ b/drivers/pci/controller/dwc/Kconfig
>> @@ -193,4 +193,14 @@ config PCIE_HISI_STB
>>  	help
>>            Say Y here if you want PCIe controller support on HiSilicon STB SoCs
>>  
>> +config PCI_MESON
>> +	bool "MESON PCIe controller"
>> +	depends on PCI_MSI_IRQ_DOMAIN
>> +	select PCIE_DW_HOST
>> +	help
>> +	  Say Y here if you want to enable PCI controller support on Amlogic
>> +	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
>> +	  and therefore the driver re-uses the DesignWare core functions to
>> +	  implement the driver.
>> +
>>  endmenu
>> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
>> index fcf91ea..e05a015 100644
>> --- a/drivers/pci/controller/dwc/Makefile
>> +++ b/drivers/pci/controller/dwc/Makefile
>> @@ -14,6 +14,7 @@ obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>>  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
>>  obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
>>  obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
>> +obj-$(CONFIG_PCI_MESON) += pci-meson.o
>>  
>>  # The following drivers are for devices that use the generic ACPI
>>  # pci_root.c driver but don't support standard ECAM config access.
>> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
>> new file mode 100644
>> index 0000000..428ed42
>> --- /dev/null
>> +++ b/drivers/pci/controller/dwc/pci-meson.c
>> @@ -0,0 +1,603 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PCIe host controller driver for Amlogic MESON SoCs
>> + *
>> + * Copyright (c) 2018 Amlogic, inc.
>> + * Author: Yue Wang <yue.wang@xxxxxxxxxxx>
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/resource.h>
>> +#include <linux/types.h>
>> +#include <linux/reset.h>
> 
> Alphabetical order.
> 

ok, I will modify and pay attention to this later.

>> +#include "pcie-designware.h"
>> +
>> +#define to_meson_pcie(x) dev_get_drvdata((x)->dev)
>> +
>> +/* External local bus interface registers */
>> +#define PLR_OFFSET			0x700
>> +#define PCIE_PORT_LINK_CTRL_OFF		(PLR_OFFSET + 0x10)
>> +#define FAST_LINK_MODE			BIT(7)
>> +#define LINK_CAPABLE_MASK		GENMASK(21, 16)
>> +#define LINK_CAPABLE_X1			BIT(16)
>> +
>> +#define PCIE_GEN2_CTRL_OFF		(PLR_OFFSET + 0x10c)
>> +#define NUM_OF_LANES_MASK		GENMASK(12, 8)
>> +#define NUM_OF_LANES_X1			BIT(8)
>> +#define DIRECT_SPEED_CHANGE		BIT(17)
>> +
>> +#define TYPE1_HDR_OFFSET		0x0
>> +#define PCIE_STATUS_COMMAND		(TYPE1_HDR_OFFSET + 0x04)
>> +#define PCI_IO_EN			BIT(0)
>> +#define PCI_MEM_SPACE_EN		BIT(1)
>> +#define PCI_BUS_MASTER_EN		BIT(2)
>> +
>> +#define PCIE_BASE_ADDR0			(TYPE1_HDR_OFFSET + 0x10)
>> +#define PCIE_BASE_ADDR1			(TYPE1_HDR_OFFSET + 0x14)
>> +
>> +#define PCIE_CAP_OFFSET			0x70
>> +#define PCIE_DEV_CTRL_DEV_STUS		(PCIE_CAP_OFFSET + 0x08)
>> +#define PCIE_CAP_MAX_PAYLOAD_MASK	GENMASK(7, 5)
>> +#define PCIE_CAP_MAX_PAYLOAD_SIZE(x)	((x) << 5)
>> +#define PCIE_CAP_MAX_READ_REQ_MASK	GENMASK(14, 12)
>> +#define PCIE_CAP_MAX_READ_REQ_SIZE(x)	((x) << 12)
>> +
>> +#define PCI_CLASS_REVISION_MASK		GENMASK(7, 0)
> 
> Unused.
> 
>> +/* PCIe specific config registers */
>> +#define PCIE_CFG0			0x0
>> +#define APP_LTSSM_ENABLE		BIT(7)
>> +
>> +#define PCIE_CFG_STATUS12		0x30
>> +#define IS_SMLH_LINK_UP(x)		((x) & (1 << 6))
>> +#define IS_RDLH_LINK_UP(x)		((x) & (1 << 16))
>> +#define IS_LTSSM_UP(x)			((((x) >> 10) & 0x1f) == 0x11)
>> +
>> +#define PCIE_CFG_STATUS17		0x44
>> +#define PM_CURRENT_STATE(x)		(((x) >> 7) & 0x1)
>> +
>> +#define WAIT_LINKUP_TIMEOUT		2000
>> +#define PORT_CLK_RATE			100000000UL
>> +#define MAX_PAYLOAD_SIZE		256
>> +#define MAX_READ_REQ_SIZE		256
>> +#define MESON_PCIE_PHY_POWERUP		0x1c
>> +#define PCIE_RESET_DELAY		500
>> +#define PCIE_SHARED_RESET		1
>> +#define PCIE_NORMAL_RESET		0
>> +
>> +enum pcie_data_rate {
>> +	PCIE_GEN1,
>> +	PCIE_GEN2,
>> +	PCIE_GEN3,
>> +	PCIE_GEN4
>> +};
>> +
>> +struct meson_pcie_mem_res {
>> +	void __iomem *elbi_base;
>> +	void __iomem *cfg_base;
>> +	void __iomem *phy_base;
>> +};
>> +
>> +struct meson_pcie_clk_res {
>> +	struct clk *clk;
>> +	struct clk *mipi_gate;
>> +	struct clk *port_clk;
>> +	struct clk *general_clk;
>> +};
>> +
>> +struct meson_pcie_rc_reset {
>> +	struct reset_control *phy;
>> +	struct reset_control *port;
>> +	struct reset_control *apb;
>> +};
>> +
>> +struct meson_pcie {
>> +	struct dw_pcie pci;
>> +	struct meson_pcie_mem_res mem_res;
>> +	struct meson_pcie_clk_res clk_res;
>> +	struct meson_pcie_rc_reset mrst;
>> +	struct gpio_desc *reset_gpio;
>> +
>> +	enum of_gpio_flags gpio_flag;
> 
> Unused.
> 
>> +	int pcie_num;
> 
> Unused.
> 
>> +	u32 port_num;
> 
> Unused.
> 
> Please check these details before resubmitting.
> 

ok, I will correct these and re-check all code again.

>> +};
>> +
>> +static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
>> +						  const char *id,
>> +						  u32 reset_type)
>> +{
>> +	struct device *dev = mp->pci.dev;
>> +	struct reset_control *reset;
>> +
>> +	if (reset_type == PCIE_SHARED_RESET)
>> +		reset = devm_reset_control_get_shared(dev, id);
>> +	else
>> +		reset = devm_reset_control_get(dev, id);
>> +
>> +	return reset;
>> +}
>> +
>> +static int meson_pcie_get_resets(struct meson_pcie *mp)
>> +{
>> +	struct meson_pcie_rc_reset *mrst = &mp->mrst;
>> +
>> +	mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
>> +	if (IS_ERR(mrst->phy))
>> +		return PTR_ERR(mrst->phy);
>> +	reset_control_deassert(mrst->phy);
>> +
>> +	mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
>> +	if (IS_ERR(mrst->port))
>> +		return PTR_ERR(mrst->port);
>> +	reset_control_deassert(mrst->port);
>> +
>> +	mrst->apb = meson_pcie_get_reset(mp, "apb", PCIE_SHARED_RESET);
>> +	if (IS_ERR(mrst->apb))
>> +		return PTR_ERR(mrst->apb);
>> +	reset_control_deassert(mrst->apb);
>> +
>> +	return 0;
>> +}
>> +
>> +static void __iomem *meson_pcie_get_mem(struct platform_device *pdev,
>> +					struct meson_pcie *mp,
>> +					const char *id)
>> +{
>> +	struct device *dev = mp->pci.dev;
>> +	struct resource *res;
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
>> +
>> +	return devm_ioremap_resource(dev, res);
>> +}
>> +
>> +static void __iomem *meson_pcie_get_mem_shared(struct platform_device *pdev,
>> +					       struct meson_pcie *mp,
>> +					       const char *id)
>> +{
>> +	struct device *dev = mp->pci.dev;
>> +	struct resource *res;
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
>> +	if (!res) {
>> +		dev_err(dev, "No REG resource %s\n", id);
>> +		return ERR_PTR(-ENXIO);
>> +	}
>> +
>> +	return devm_ioremap(dev, res->start, resource_size(res));
>> +}
>> +
>> +static int meson_pcie_get_mems(struct platform_device *pdev,
>> +			       struct meson_pcie *mp)
>> +{
>> +	mp->mem_res.elbi_base = meson_pcie_get_mem(pdev, mp, "elbi");
>> +	if (IS_ERR(mp->mem_res.elbi_base))
>> +		return PTR_ERR(mp->mem_res.elbi_base);
>> +
>> +	mp->mem_res.cfg_base = meson_pcie_get_mem(pdev, mp, "cfg");
>> +	if (IS_ERR(mp->mem_res.cfg_base))
>> +		return PTR_ERR(mp->mem_res.cfg_base);
>> +
>> +	/* Meson SoC has two PCI controllers use same phy register*/
>> +	mp->mem_res.phy_base = meson_pcie_get_mem_shared(pdev, mp, "phy");
>> +	if (IS_ERR(mp->mem_res.phy_base))
>> +		return PTR_ERR(mp->mem_res.phy_base);
>> +
>> +	return 0;
>> +}
>> +
>> +static void meson_pcie_power_on(struct meson_pcie *mp)
>> +{
>> +	writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
>> +}
>> +
>> +static void meson_pcie_reset(struct meson_pcie *mp)
>> +{
>> +	struct meson_pcie_rc_reset *mrst = &mp->mrst;
>> +
>> +	reset_control_assert(mrst->phy);
>> +	udelay(PCIE_RESET_DELAY);
>> +	reset_control_deassert(mrst->phy);
>> +	udelay(PCIE_RESET_DELAY);
>> +
>> +	reset_control_assert(mrst->port);
>> +	reset_control_assert(mrst->apb);
>> +	udelay(PCIE_RESET_DELAY);
>> +	reset_control_deassert(mrst->port);
>> +	reset_control_deassert(mrst->apb);
>> +	udelay(PCIE_RESET_DELAY);
>> +}
>> +
>> +static inline struct clk *meson_pcie_probe_clock(struct device *dev,
>> +						 const char *id, u64 rate)
>> +{
>> +	struct clk *clk;
>> +	int ret;
>> +
>> +	clk = devm_clk_get(dev, id);
>> +	if (IS_ERR(clk))
>> +		return clk;
>> +
>> +	if (rate) {
>> +		ret = clk_set_rate(clk, rate);
>> +		if (ret) {
>> +			dev_err(dev, "set clk rate failed, ret = %d\n", ret);
>> +			return ERR_PTR(ret);
>> +		}
>> +	}
>> +
>> +	ret = clk_prepare_enable(clk);
>> +	if (ret) {
>> +		dev_err(dev, "couldn't enable clk\n");
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	devm_add_action_or_reset(dev,
>> +				 (void (*) (void *))clk_disable_unprepare,
>> +				 clk);
>> +
>> +	return clk;
>> +}
>> +
>> +static int meson_pcie_probe_clocks(struct meson_pcie *mp)
>> +{
>> +	struct device *dev = mp->pci.dev;
>> +	struct meson_pcie_clk_res *res = &mp->clk_res;
>> +
>> +	res->port_clk = meson_pcie_probe_clock(dev, "port", PORT_CLK_RATE);
>> +	if (IS_ERR(res->port_clk))
>> +		return PTR_ERR(res->port_clk);
>> +
>> +	res->mipi_gate = meson_pcie_probe_clock(dev, "pcie_mipi_en", 0);
>> +	if (IS_ERR(res->mipi_gate))
>> +		return PTR_ERR(res->mipi_gate);
>> +
>> +	res->general_clk = meson_pcie_probe_clock(dev, "pcie_general", 0);
>> +	if (IS_ERR(res->general_clk))
>> +		return PTR_ERR(res->general_clk);
>> +
>> +	res->clk = meson_pcie_probe_clock(dev, "pcie", 0);
>> +	if (IS_ERR(res->clk))
>> +		return PTR_ERR(res->clk);
>> +
>> +	return 0;
>> +}
>> +
>> +static inline void meson_elb_writel(struct meson_pcie *mp, u32 val, u32 reg)
>> +{
>> +	writel(val, mp->mem_res.elbi_base + reg);
>> +}
>> +
>> +static inline u32 meson_elb_readl(struct meson_pcie *mp, u32 reg)
>> +{
>> +	return readl(mp->mem_res.elbi_base + reg);
>> +}
>> +
>> +static inline u32 meson_cfg_readl(struct meson_pcie *mp, u32 reg)
>> +{
>> +	return readl(mp->mem_res.cfg_base + reg);
>> +}
>> +
>> +static inline void meson_cfg_writel(struct meson_pcie *mp, u32 val, u32 reg)
>> +{
>> +	writel(val, mp->mem_res.cfg_base + reg);
>> +}
>> +
>> +static void meson_pcie_assert_reset(struct meson_pcie *mp)
>> +{
>> +	gpiod_set_value_cansleep(mp->reset_gpio, 0);
>> +	udelay(500);
>> +	gpiod_set_value_cansleep(mp->reset_gpio, 1);
>> +}
>> +
>> +static void meson_pcie_init_dw(struct meson_pcie *mp)
>> +{
>> +	u32 val;
>> +
>> +	val = meson_cfg_readl(mp, PCIE_CFG0);
>> +	val |= APP_LTSSM_ENABLE;
>> +	meson_cfg_writel(mp, val, PCIE_CFG0);
>> +
>> +	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
>> +	val &= ~LINK_CAPABLE_MASK;
>> +	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>> +
>> +	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
>> +	val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
>> +	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>> +
>> +	val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
>> +	val &= ~NUM_OF_LANES_MASK;
>> +	meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
>> +
>> +	val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
>> +	val |= NUM_OF_LANES_X1 | DIRECT_SPEED_CHANGE;
>> +	meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
>> +
>> +	meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR0);
>> +	meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR1);
>> +}
>> +
>> +static int meson_size_to_payload(struct meson_pcie *mp, int size)
>> +{
>> +	struct device *dev = mp->pci.dev;
>> +
>> +	/*
>> +	 * dwc supports 2^(val+7) payload size, which val is 0~5 default to 1.
>> +	 * So if input size is not 2^order alignment or less than 2^7 or bigger
>> +	 * than 2^12, just set to default size 2^(1+7).
>> +	 */
>> +	if (!is_power_of_2(size) || size < 128 || size > 4096) {
>> +		dev_warn(dev, "playload size %d, set to default 256\n", size);
>> +		return 1;
>> +	}
>> +
>> +	return fls(size) - 8;
>> +}
>> +
>> +static void meson_set_max_payload(struct meson_pcie *mp, int size)
>> +{
>> +	u32 val = 0;
>> +	int max_payload_size = meson_size_to_payload(mp, size);
>> +
>> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> +	val &= ~PCIE_CAP_MAX_PAYLOAD_MASK;
>> +	meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +
>> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> +	val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
>> +	meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +}
>> +
>> +static void meson_set_max_rd_req_size(struct meson_pcie *mp, int size)
>> +{
>> +	u32 val;
>> +	int max_rd_req_size = meson_size_to_payload(mp, size);
>> +
>> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> +	val &= ~PCIE_CAP_MAX_READ_REQ_MASK;
>> +	meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +
>> +	val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> +	val |= PCIE_CAP_MAX_READ_REQ_SIZE(max_rd_req_size);
>> +	meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +}
>> +
>> +static inline void meson_enable_memory_space(struct meson_pcie *mp)
>> +{
>> +	/* Set the RC Bus Master, Memory Space and I/O Space enables */
>> +	meson_elb_writel(mp, PCI_IO_EN | PCI_MEM_SPACE_EN | PCI_BUS_MASTER_EN,
>> +			 PCIE_STATUS_COMMAND);
>> +}
>> +
>> +static int meson_pcie_establish_link(struct meson_pcie *mp)
>> +{
>> +	struct dw_pcie *pci = &mp->pci;
>> +	struct pcie_port *pp = &pci->pp;
>> +
>> +	meson_pcie_init_dw(mp);
>> +	meson_set_max_payload(mp, MAX_PAYLOAD_SIZE);
>> +	meson_set_max_rd_req_size(mp, MAX_READ_REQ_SIZE);
>> +
>> +	dw_pcie_setup_rc(pp);
>> +	meson_enable_memory_space(mp);
>> +
>> +	meson_pcie_assert_reset(mp);
>> +
>> +	return dw_pcie_wait_for_link(pci);
>> +}
>> +
>> +static void meson_pcie_enable_interrupts(struct meson_pcie *mp)
>> +{
>> +	if (IS_ENABLED(CONFIG_PCI_MSI))
>> +		dw_pcie_msi_init(&mp->pci.pp);
>> +}
>> +
>> +static int meson_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
>> +				  u32 *val)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +	int ret;
>> +
>> +	ret = dw_pcie_read(pci->dbi_base + where, size, val);
>> +	if (ret != PCIBIOS_SUCCESSFUL)
>> +		return ret;
>> +
>> +	/*
>> +	 * There is a bug in the MESON AXG pcie controller whereby software
>> +	 * cannot programme the PCI_CLASS_DEVICE register, so we must fabricate
>> +	 * the return value in the config accessors.
>> +	 */
>> +	if (where == PCI_CLASS_REVISION && size == 4)
>> +		*val = (PCI_CLASS_BRIDGE_PCI << 16) | (*val & 0xffff);
>> +	else if (where == PCI_CLASS_DEVICE && size == 2)
>> +		*val = PCI_CLASS_BRIDGE_PCI;
>> +	else if (where == PCI_CLASS_DEVICE && size == 1)
>> +		*val = PCI_CLASS_BRIDGE_PCI & 0xff;
>> +	else if (where == PCI_CLASS_DEVICE + 1 && size == 1)
>> +		*val = (PCI_CLASS_BRIDGE_PCI >> 8) & 0xff;
>> +
>> +	return PCIBIOS_SUCCESSFUL;
>> +}
>> +
>> +static int meson_pcie_wr_own_conf(struct pcie_port *pp, int where,
>> +				  int size, u32 val)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +
>> +	return dw_pcie_write(pci->dbi_base + where, size, val);
>> +}
>> +
>> +static int meson_pcie_link_up(struct dw_pcie *pci)
>> +{
>> +	struct meson_pcie *mp = to_meson_pcie(pci);
>> +	struct device *dev = pci->dev;
>> +	u32 smlh_up = 0;
>> +	u32 ltssm_up = 0;
>> +	u32 rdlh_up = 0;
>> +	u32 speed_okay = 0;
>> +	u32 cnt = 0;
>> +	u32 state12, state17;
>> +
> 
> Nit: a
> 
> do {
> 
> } while (...)
> 
> makes more sense given the variables you are checking.
> 
> Lorenzo
> 

Yes, it's more readable, I'll modify that.

thanks for all.

>> +	while (smlh_up == 0 || rdlh_up == 0 || ltssm_up == 0 ||
>> +	       speed_okay == 0) {
>> +		udelay(20);
>> +
>> +		state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12);
>> +		state17 = meson_cfg_readl(mp, PCIE_CFG_STATUS17);
>> +		smlh_up = IS_SMLH_LINK_UP(state12);
>> +		rdlh_up = IS_RDLH_LINK_UP(state12);
>> +		ltssm_up = IS_LTSSM_UP(state12);
>> +
>> +		if (PM_CURRENT_STATE(state17) < PCIE_GEN3)
>> +			speed_okay = 1;
>> +
>> +		if (smlh_up)
>> +			dev_dbg(dev, "smlh_link_up is on\n");
>> +		if (rdlh_up)
>> +			dev_dbg(dev, "rdlh_link_up is on\n");
>> +		if (ltssm_up)
>> +			dev_dbg(dev, "ltssm_up is on\n");
>> +		if (speed_okay)
>> +			dev_dbg(dev, "speed_okay\n");
>> +
>> +		cnt++;
>> +
>> +		if (cnt >= WAIT_LINKUP_TIMEOUT) {
>> +			dev_err(dev, "Error: Wait linkup timeout.\n");
>> +			return 0;
>> +		}
>> +	}
>> +
>> +	return 1;
>> +}
>> +
>> +static int meson_pcie_host_init(struct pcie_port *pp)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +	struct meson_pcie *mp = to_meson_pcie(pci);
>> +	int ret;
>> +
>> +	ret = meson_pcie_establish_link(mp);
>> +	if (ret)
>> +		return ret;
>> +
>> +	meson_pcie_enable_interrupts(mp);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct dw_pcie_host_ops meson_pcie_host_ops = {
>> +	.rd_own_conf = meson_pcie_rd_own_conf,
>> +	.wr_own_conf = meson_pcie_wr_own_conf,
>> +	.host_init = meson_pcie_host_init,
>> +};
>> +
>> +static int meson_add_pcie_port(struct meson_pcie *mp,
>> +			       struct platform_device *pdev)
>> +{
>> +	struct dw_pcie *pci = &mp->pci;
>> +	struct pcie_port *pp = &pci->pp;
>> +	struct device *dev = &pdev->dev;
>> +	int ret;
>> +
>> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> +		pp->msi_irq = platform_get_irq(pdev, 0);
>> +		if (pp->msi_irq < 0) {
>> +			dev_err(dev, "failed to get msi irq\n");
>> +			return pp->msi_irq;
>> +		}
>> +	}
>> +
>> +	pp->ops = &meson_pcie_host_ops;
>> +	pci->dbi_base = mp->mem_res.elbi_base;
>> +
>> +	ret = dw_pcie_host_init(pp);
>> +	if (ret) {
>> +		dev_err(dev, "failed to initialize host\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct dw_pcie_ops dw_pcie_ops = {
>> +	.link_up = meson_pcie_link_up,
>> +};
>> +
>> +static int meson_pcie_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct dw_pcie *pci;
>> +	struct meson_pcie *mp;
>> +	int ret;
>> +
>> +	mp = devm_kzalloc(dev, sizeof(*mp), GFP_KERNEL);
>> +	if (!mp)
>> +		return -ENOMEM;
>> +
>> +	pci = &mp->pci;
>> +	pci->dev = dev;
>> +	pci->ops = &dw_pcie_ops;
>> +
>> +	mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>> +	if (IS_ERR(mp->reset_gpio)) {
>> +		dev_err(dev, "Get reset gpio failed\n");
>> +		return PTR_ERR(mp->reset_gpio);
>> +	}
>> +
>> +	ret = meson_pcie_get_resets(mp);
>> +	if (ret) {
>> +		dev_err(dev, "Get reset resource failed, %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = meson_pcie_get_mems(pdev, mp);
>> +	if (ret) {
>> +		dev_err(dev, "Get memory resource failed, %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	meson_pcie_power_on(mp);
>> +	meson_pcie_reset(mp);
>> +
>> +	ret = meson_pcie_probe_clocks(mp);
>> +	if (ret) {
>> +		dev_err(dev, "Init clock resources failed, %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, mp);
>> +
>> +	ret = meson_add_pcie_port(mp, pdev);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Add PCIE port failed, %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id meson_pcie_of_match[] = {
>> +	{
>> +		.compatible = "amlogic,axg-pcie",
>> +	},
>> +	{},
>> +};
>> +
>> +static struct platform_driver meson_pcie_driver = {
>> +	.probe = meson_pcie_probe,
>> +	.driver = {
>> +		.name = "meson-pcie",
>> +		.of_match_table = meson_pcie_of_match,
>> +	},
>> +};
>> +
>> +builtin_platform_driver(meson_pcie_driver);
>> -- 
>> 2.7.4
>>
> 
> .
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux