Remove 3-bit right rotation on MSI-X table offset address calculation on
dw_pcie_ep_raise_msix_irq().
By default, the offset address of the MSI-X table is zero, so that even with a
3-bit right rotation, the computed result would still be zero, so still valid.
Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-designware-ep.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 1e7b022..cdb2005 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -440,7 +440,6 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
tbl_offset = dw_pcie_readl_dbi(pci, reg);
bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
tbl_offset &= PCI_MSIX_TABLE_OFFSET;
- tbl_offset >>= 3;
reg = PCI_BASE_ADDRESS_0 + (4 * bir);
bar_addr_upper = 0;
@@ -466,8 +465,10 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
iounmap(msix_tbl);
- if (vec_ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT)
+ if (vec_ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT) {
+ dev_err(pci->dev, "MSI-X entry ctrl set\n");
return -EPERM;
+ }
ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr,
epc->mem->page_size);
--
2.7.4
