The BrcmSTB PCIe controller needs to remap DMA accesses to it because
of the requirements of its interface with the SOC memory controllers.
Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
---
drivers/pci/controller/Kconfig | 1 +
drivers/pci/controller/pcie-brcmstb.c | 12 ++++++++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 8daa621..4394430 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -284,6 +284,7 @@ config PCIE_BRCMSTB
depends on OF && PCI_MSI
depends on SOC_BRCMSTB
default ARCH_BRCMSTB || BMIPS_GENERIC
+ select ARCH_HAS_PHYS_TO_DMA if ARM64
help
Say Y here to enable PCIe host controller support for
Broadcom Settop Box SOCs. A Broadcom SOC will may have
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index a805d87..ae9df8e 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -974,6 +974,18 @@ phys_addr_t brcm_dma_to_phys(struct device *dev, dma_addr_t dev_addr)
return (phys_addr_t)dev_addr;
}
+#if defined(CONFIG_ARM64)
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return brcm_phys_to_dma(dev, paddr);
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr)
+{
+ return brcm_dma_to_phys(dev, dev_addr);
+}
+#endif
+
static int brcm_pcie_add_controller(struct brcm_pcie *pcie)
{
int i, ret = 0;
--
1.9.0.138.g2de3478
