The IRQ physical address is allocated from region 0, rather than
the highest region. Update the driver to reserve this region in
the bitmap, and to use region 0 for all types of interrupt.
This corrects a problem which prevents the interrupt being
signalled correctly if using the first address in the AXI region,
since an offset of zero will always be mapped to region 0.
Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Alan Douglas <adouglas@xxxxxxxxxxx>
---
drivers/pci/controller/pcie-cadence-ep.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/controller/pcie-cadence-ep.c b/drivers/pci/controller/pcie-cadence-ep.c
index e3fe412..a67dc91 100644
--- a/drivers/pci/controller/pcie-cadence-ep.c
+++ b/drivers/pci/controller/pcie-cadence-ep.c
@@ -259,7 +259,6 @@ static void cdns_pcie_ep_assert_intx(struct cdns_pcie_ep *ep, u8 fn,
u8 intx, bool is_asserted)
{
struct cdns_pcie *pcie = &ep->pcie;
- u32 r = ep->max_regions - 1;
u32 offset;
u16 status;
u8 msg_code;
@@ -269,8 +268,8 @@ static void cdns_pcie_ep_assert_intx(struct cdns_pcie_ep *ep, u8 fn,
/* Set the outbound region if needed. */
if (unlikely(ep->irq_pci_addr != CDNS_PCIE_EP_IRQ_PCI_ADDR_LEGACY ||
ep->irq_pci_fn != fn)) {
- /* Last region was reserved for IRQ writes. */
- cdns_pcie_set_outbound_region_for_normal_msg(pcie, fn, r,
+ /* First region was reserved for IRQ writes. */
+ cdns_pcie_set_outbound_region_for_normal_msg(pcie, fn, 0,
ep->irq_phys_addr);
ep->irq_pci_addr = CDNS_PCIE_EP_IRQ_PCI_ADDR_LEGACY;
ep->irq_pci_fn = fn;
@@ -348,8 +347,8 @@ static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn,
/* Set the outbound region if needed. */
if (unlikely(ep->irq_pci_addr != (pci_addr & ~pci_addr_mask) ||
ep->irq_pci_fn != fn)) {
- /* Last region was reserved for IRQ writes. */
- cdns_pcie_set_outbound_region(pcie, fn, ep->max_regions - 1,
+ /* First region was reserved for IRQ writes. */
+ cdns_pcie_set_outbound_region(pcie, fn, 0,
false,
ep->irq_phys_addr,
pci_addr & ~pci_addr_mask,
@@ -510,6 +509,8 @@ static int cdns_pcie_ep_probe(struct platform_device *pdev)
goto free_epc_mem;
}
ep->irq_pci_addr = CDNS_PCIE_EP_IRQ_PCI_ADDR_NONE;
+ /* Reserve region 0 for IRQs */
+ set_bit(0, &ep->ob_region_map);
return 0;
--
1.9.0
