Re: [PATCH] ARM: dts: qcom-apq8064: use correct pci address for address translation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 17, 2018 at 12:21:49PM +0100, Lorenzo Pieralisi wrote:
> On Wed, May 09, 2018 at 02:01:34PM +0200, Niklas Cassel wrote:
> > For PCI, the second and third cell in ranges specifies the upper and
> > lower target address for address translation. This target address will
> > be used to program the internal address translation unit (iATU).
> > 
> > The current device tree configuration will program the iATU to translate
> > CPU accesses to 0x08000000 to PCI address 0x0 (with TLP type MEM).
> > The device tree configuration also specifies that CPU acesses to
> > 0x0fe00000 will be translated to PCI address 0x0 (with TLP type I/O).
> > 
> > We cannot have both I/O space and memory space at PCI address 0x0.
> > 
> > The PCI code already uses the CPU address when assigning addresses to
> > memory BARs, so for memory space the PCI address should be the same as
> > the CPU address. This also matches how all other device trees using
> > snps,dw-pcie are configured.
> > 
> > The existing configuration appears to work, even if it is incorrect.
> > For some reason the iATU doesn't obey the existing configuration,
> > and doesn't translate CPU accesses from 0x08000000 to PCI address 0x0.
> > 
> > The reason why the existing configuration works at all is probably
> > because the default behavior, when there is no match, is to use the
> > untranslated address. This happens to work for memory space, since
> > it's a 1:1 mapping. However, instead of relying on this behavior,
> > let's configure the iATU correctly.
> > 
> > Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> Hi Niklas,
> 
> what's this patch status ? Please let me know if I have to keep
> it in the PCI tree queue, I think, if ACKed, it should probably
> go via the arm-soc tree.

Hello Lorenzo,

This patch has been merged and is included in v4.18.

I CC:ed PCI just to get more eyes on it.


Kind regards,
Niklas


> 
> Thanks,
> Lorenzo
> 
> > diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> > index 5341a39c0392..148cf7e565f6 100644
> > --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> > +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> > @@ -1417,7 +1417,7 @@
> >  			#address-cells = <3>;
> >  			#size-cells = <2>;
> >  			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
> > -				  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
> > +				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
> >  			interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
> >  			interrupt-names = "msi";
> >  			#interrupt-cells = <1>;
> > -- 
> > 2.17.0
> > 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux