PCIe native hotplug shares MSI vector with native PME so the interrupt handler might get called even the hotplug interrupt is masked. In that case we should not handle any events because the interrupt was not meant for us. Modify the PCIe hotplug interrupt handler to check this accordingly and bail out if it finds out that the interrupt was not about hotplug. Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Reviewed-by: Lukas Wunner <lukas@xxxxxxxxx> --- drivers/pci/hotplug/pciehp_hpc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 02fb6e367e2a..26598a03e84b 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -533,9 +533,11 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id) u16 status, events; /* - * Interrupts only occur in D3hot or shallower (PCIe r4.0, sec 6.7.3.4). + * Interrupts only occur in D3hot or shallower and only if enabled + * in the Slot Control register (PCIe r4.0, sec 6.7.3.4). */ - if (pdev->current_state == PCI_D3cold) + if (pdev->current_state == PCI_D3cold || + (!(ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE) && !pciehp_poll_mode)) return IRQ_NONE; /* -- 2.18.0
