On Mon, Sep 10, 2018 at 04:57:22PM +0800, Jisheng Zhang wrote:
> Hi all,
>
> On Wed, 29 Aug 2018 11:04:08 +0800 Jisheng Zhang wrote:
>
> > When programming inbound/outbound atu, we call usleep_range() after
> > each checking PCIE_ATU_ENABLE bit. Unfortunately, the atu programming
> > can be called in atomic context:
> >
> > inbound atu programming could be called through
> > pci_epc_write_header()
> > =>dw_pcie_ep_write_header()
> > =>dw_pcie_prog_inbound_atu()
> >
> > outbound atu programming could be called through
> > pci_bus_read_config_dword()
> > =>dw_pcie_rd_conf()
> > =>dw_pcie_prog_outbound_atu()
> >
> > Fix this issue by calling mdelay() instead.
>
> Any comments about this patch?
>
> Thanks,
> Jisheng
>
> >
> > Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support")
> > Fixes: d8bbeb39fbf3 ("PCI: designware: Wait for iATU enable")
Can you split it into two patches and repost it please ? It will make
everyone's life easier to backport it if there is need, I will apply
then.
Thanks,
Lorenzo
> > Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
> > Acked-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
> > ---
> >
> > since v2:
> > - Add Fixes tag
> > - Add Gustavo's Ack
> >
> > since v1:
> > - use mdelay() instead of udelay() to avoid __bad_udelay()
> >
> > drivers/pci/controller/dwc/pcie-designware.c | 8 ++++----
> > drivers/pci/controller/dwc/pcie-designware.h | 3 +--
> > 2 files changed, 5 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index 778c4f76a884..2153956a0b20 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -135,7 +135,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
> > if (val & PCIE_ATU_ENABLE)
> > return;
> >
> > - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> > + mdelay(LINK_WAIT_IATU);
> > }
> > dev_err(pci->dev, "Outbound iATU is not being enabled\n");
> > }
> > @@ -178,7 +178,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
> > if (val & PCIE_ATU_ENABLE)
> > return;
> >
> > - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> > + mdelay(LINK_WAIT_IATU);
> > }
> > dev_err(pci->dev, "Outbound iATU is not being enabled\n");
> > }
> > @@ -236,7 +236,7 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> > if (val & PCIE_ATU_ENABLE)
> > return 0;
> >
> > - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> > + mdelay(LINK_WAIT_IATU);
> > }
> > dev_err(pci->dev, "Inbound iATU is not being enabled\n");
> >
> > @@ -282,7 +282,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > if (val & PCIE_ATU_ENABLE)
> > return 0;
> >
> > - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> > + mdelay(LINK_WAIT_IATU);
> > }
> > dev_err(pci->dev, "Inbound iATU is not being enabled\n");
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index 96126fd8403c..9f1a5e399b70 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -26,8 +26,7 @@
> >
> > /* Parameters for the waiting for iATU enabled routine */
> > #define LINK_WAIT_MAX_IATU_RETRIES 5
> > -#define LINK_WAIT_IATU_MIN 9000
> > -#define LINK_WAIT_IATU_MAX 10000
> > +#define LINK_WAIT_IATU 9
> >
> > /* Synopsys-specific PCIe configuration registers */
> > #define PCIE_PORT_LINK_CONTROL 0x710
>
