The ACPI specification allows you to provide _PXM entries for devices based
on their location on a particular bus. Let us use that if it is provided
rather than just assuming it makes sense to put the device into the proximity
domain of the root.
An example DSDT entry that will supply this is:
Device (PCI2)
{
Name (_HID, "PNP0A08") // PCI Express Root Bridge
Name (_CID, "PNP0A03") // Compatible PCI Root Bridge
Name(_SEG, 2) // Segment of this Root complex
Name(_BBN, 0xF8) // Base Bus Number
Name(_CCA, 1)
Method (_PXM, 0, NotSerialized) {
Return(0x00)
}
...
Device (BRI0) {
Name (_HID, "19E51610")
Name (_ADR, 0)
Name (_BBN, 0xF9)
Device (CAR0) {
Name (_HID, "97109912")
Name (_ADR, 0)
Method (_PXM, 0, NotSerialized) {
Return(0x02)
}
}
}
}
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/pci/pci-acpi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 738e3546abb1..f2f5f0ddd60e 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -753,10 +753,15 @@ static void pci_acpi_setup(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct acpi_device *adev = ACPI_COMPANION(dev);
+ int node;
if (!adev)
return;
+ node = acpi_get_node(adev->handle);
+ if (node != NUMA_NO_NODE)
+ set_dev_node(dev, node);
+
pci_acpi_optimize_delay(pci_dev, adev->handle);
pci_acpi_add_pm_notifier(adev, pci_dev);
--
2.18.0
