Re: [PATCH] PCI: Reprogram bridge prefetch registers on resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[+cc LKML, Dave, Luming]

On Fri, Sep 07, 2018 at 05:05:15PM +0200, Peter Wu wrote:
> On Fri, Sep 07, 2018 at 01:36:14PM +0800, Daniel Drake wrote:
> <..>
> > Thomas Martitz reports that this workaround also solves an issue where
> > the AMD Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive
> > after S3 suspend/resume.
> 
> Where was this claimed? It is not stated in the linked bug:
> (https://bugs.freedesktop.org/show_bug.cgi?id=105760
> 
> > On resume, reprogram the PCI bridge prefetch registers, including the
> > magic register mentioned above.
> > 
> > This matches Win10 behaviour, which also rewrites these registers
> > during S3 resume (checked with qemu tracing).
> 
> Windows 10 unconditionally rewrites these registers (BAR, I/O Base +
> Limit, Memory Base + Limit, etc. from top to bottom), see annotations:
> https://www.spinics.net/lists/linux-pci/msg75856.html
> 
> Linux has a generic "restore" operation that works backwards from the
> end of the PCI config space to the beginning, see
> pci_restore_config_space. Do you have a dmesg where you see the
> "restoring config space at offset" messages?
> 
> Would it be reasonable to unconditionally write these registers in
> pci_restore_config_dword, like Windows does?

That sounds reasonable to me.

We did write them unconditionally, prior to 04d9c1a1100b ("[PATCH]
PCI: Improve PCI config space writeback") [1].  That commit apparently
fixed suspend on some laptop.

But at that time, we restored the config space in order of dword 0, 1,
2, ... 15, which means we restored the command register before the
BARs and windows, and it's conceivable that the problem was the
ordering, not the rewriting of the same value.

Only a week later, we reversed the order with 8b8c8d280ab2 ("[PATCH]
PCI: reverse pci config space restore order") [2], which seems like a
good idea and even includes a spec reference.  I found similar
language in the Intel ICH 10 datasheet, sec 14.1.3 [3].

So it seems reasonable to me to try writing them unconditionally in
reverse order (the same order we use today).

[1] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=04d9c1a1100b
[2] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8b8c8d280ab2
[3] Intel ICH 10 IBL 373635



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux