Hi Keith,
Which tag or branch is your patch based on? I can't apply it on the
master branch of
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
Thank you,
Thomas
On 09/05/2018 04:35 PM, Keith Busch wrote:
v1 -> v2:
* Use Dennis' patch for the incorrect slot reset detection since he
posted that fix first
* I found some DPC and HPC capable ports (PLX Device 9781 to be
specific) that don't have data-link active reporting capabilities,
so I added another patch to handle that
* If the recovery determines the precence detection has changed during
error handling, we need to prevent the downstream driver from
accessing the device under its old context. This was a little tricky
because of a circular dependency on the pci_bus_sem, so there is a
prep patch to allow recursive pci bus walking, and then we use it
from pciehp's slot_reset callback.
* Make error handling not able to change the error state away from
pci_channel_state_perm_failure so that hotplug and error handling
may use the same state (suggested by Benjamin Herrenschmidt)
* Moved the link active wait requirements into generic code
(suggested by Sinan Kaya)
* Check for successful secondary bus reset on recovery failure
(suggested by Sinan Kaya)
* Use pcie_device for service driver error callbacks (suggested by
Lukas Wunner)
* Hold pci_slot_lock when doing a slot reset (suggested by
Lukas Wunner)
* Fixed processing user orderly hotplug requests during error handling
suggested by Lukas Wunner)
* Various code cleanups (suggested by Christoph Hellwig)
* Split dpc code cleanup into separate patch
* Changelog grammer fixes and wording clarity
Dennis Dalessandro (1):
PCI: Fix faulty logic in pci_reset_bus()
Keith Busch (18):
PCI: Add required waits on link active
PCI/AER: Remove dead code
PCI/ERR: Use slot reset if available
PCI/ERR: Handle fatal error recovery
PCI/ERR: Always use the first downstream port
PCI/ERR: Simplify broadcast callouts
PCI/ERR: Report current recovery status for udev
PCI/ERR: Remove devices on recovery failure
PCI/portdrv: Provide pci error callbacks
PCI/portdrv: Restore pci state on slot reset
PCI: Make link active reporting detection generic
PCI: Create recursive bus walk
PCI/pciehp: Fix powerfault detection order
PCI/pciehp: Implement error handling callbacks
PCI/pciehp: Ignore link events during DPC event
PCI/DPC: Wait for link active after reset
PCI/DPC: Link reset code cleanup
PCI: Unify device inaccessible
Lukas Wunner (1):
PCI: Simplify disconnected marking
drivers/pci/bus.c | 14 +-
drivers/pci/hotplug/pciehp.h | 2 +-
drivers/pci/hotplug/pciehp_core.c | 39 +++++
drivers/pci/hotplug/pciehp_hpc.c | 56 +++----
drivers/pci/hotplug/pciehp_pci.c | 9 +-
drivers/pci/pci.c | 68 +++++++-
drivers/pci/pci.h | 17 +-
drivers/pci/pcie/aer.c | 27 ++--
drivers/pci/pcie/dpc.c | 37 +++--
drivers/pci/pcie/err.c | 327 +++++++++++++-------------------------
drivers/pci/pcie/portdrv.h | 10 +-
drivers/pci/pcie/portdrv_pci.c | 45 +++++-
drivers/pci/probe.c | 1 +
drivers/pci/slot.c | 2 +-
include/linux/pci.h | 10 ++
15 files changed, 353 insertions(+), 311 deletions(-)
