Commit baecc470d5fd ("PCI / PM: Skip bridges in pci_enable_wake()")
changed pci_enable_wake() so that all bridges are skipped when wakeup is
enabled (or disabled) with the reasoning that bridges can only signal
wakeup on behalf of their subordinate devices.
However, there are bridges that can signal wakeup itself. For example
PCIe downstream and root ports supporting hotplug may signal wakeup upon
hotplug event.
For this reason change pci_enable_wake() so that it skips all bridges
except those that we power manage (->bridge_d3 is set). Those are the
ones that can go into low power states and may need to signal wakeup.
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
drivers/pci/pci.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 29ff9619b5fa..074f3f0253f9 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2134,9 +2134,11 @@ static int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable
/*
* Bridges can only signal wakeup on behalf of subordinate devices,
- * but that is set up elsewhere, so skip them.
+ * but that is set up elsewhere, so skip them. With the exception
+ * of bridges that we power manage. These can signal wake for
+ * example on a hotplug event.
*/
- if (pci_has_subordinate(dev))
+ if (!pci_power_manageable(dev))
return 0;
/* Don't do the same thing twice in a row for one device. */
--
2.18.0
