From: Lukas Wunner <lukas@xxxxxxxxx>
Commit 89ee9f768003 ("PCI: Add device disconnected state") iterates over
the devices on a parent bus, marks each as disconnected, then marks
each device's children as disconnected using pci_walk_bus().
The same can be achieved more succinctly by calling pci_walk_bus() on
the parent bus. Moreover, this does not need to wait until acquiring
pci_lock_rescan_remove(), so move it out of that critical section.
The critical section in err.c contains a pci_dev_get() / pci_dev_put()
pair which was apparently copy-pasted from pciehp_pci.c. In the latter
it serves the purpose of holding the struct pci_dev in place until the
Command register is updated. err.c doesn't do anything like that, hence
the pair is unnecessary. Remove it.
Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
Reviewed-by: Keith Busch <keith.busch@xxxxxxxxx>
Cc: Oza Pawandeep <poza@xxxxxxxxxxxxxx>
Cc: Sinan Kaya <okaya@xxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
---
drivers/pci/hotplug/pciehp_pci.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 5c58c22e0c08..3ef5c0744249 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -74,6 +74,9 @@ void pciehp_unconfigure_device(struct slot *p_slot)
__func__, pci_domain_nr(parent), parent->number);
pciehp_get_adapter_status(p_slot, &presence);
+ if (!presence)
+ pci_walk_bus(parent, pci_dev_set_disconnected, NULL);
+
pci_lock_rescan_remove();
/*
@@ -85,12 +88,6 @@ void pciehp_unconfigure_device(struct slot *p_slot)
list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
bus_list) {
pci_dev_get(dev);
- if (!presence) {
- pci_dev_set_disconnected(dev, NULL);
- if (pci_has_subordinate(dev))
- pci_walk_bus(dev->subordinate,
- pci_dev_set_disconnected, NULL);
- }
pci_stop_and_remove_bus_device(dev);
/*
* Ensure that no new Requests will be generated from
--
2.14.4
