The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. This patchset add the driver and dt-bindings of the controller. Till patch v2, we have a dedicated phy driver which only process reset job. It's too overkill so we integrate phy driver into the controller. Changes since v2: [1] - abandon phy driver, move reset to the controller - use devm_add_action_or_reset() to use clock res - format correcting Changes since v1: [0] - use gpio lib instead open code - move 'apb' and 'port' reset from phy driver - format correcting [0] : https://lkml.kernel.org/r/1534227522-186798-1-git-send-email-hanjie.lin@xxxxxxxxxxx [1] : https://lkml.kernel.org/r/1535096165-45827-1-git-send-email-hanjie.lin@xxxxxxxxxxx Yue Wang (2): dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller PCI: meson: add the Amlogic Meson PCIe controller driver .../devicetree/bindings/pci/amlogic,meson-pcie.txt | 70 +++ drivers/pci/controller/dwc/Kconfig | 12 + drivers/pci/controller/dwc/Makefile | 1 + drivers/pci/controller/dwc/pci-meson.c | 617 +++++++++++++++++++++ 4 files changed, 700 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt create mode 100644 drivers/pci/controller/dwc/pci-meson.c -- 2.7.4
