Re: [PATCH v4] PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jul 29, 2018 at 04:16:56PM +0300, Andy Shevchenko wrote:
> There are a lot of examples in the kernel where PCI_VDEVICE() is used and still
> looks not so convenient due to additional driver_data field attached.
> 
> Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest
> possible form. For example,
> 
>   before:
> 
>     { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
>       (kernel_ulong_t) &dwc3_pci_mrfld_properties, },
> 
>   after:
> 
>     { PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_mrfld_properties) },
> 
> Drivers can be converted later on in independent way.
> 
> While here, remove the unused macro with the same name
> from Ralink wireless driver.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

Applied with Kalle's ack to pci/misc for v4.19, thanks!

> ---
> 
> - Add vend to the device (Bjorn)
> 
> Bjorn, this also looks good.
> 
>  drivers/net/wireless/ralink/rt2x00/rt2x00pci.h |  6 ------
>  include/linux/pci.h                            | 15 +++++++++++++++
>  2 files changed, 15 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
> index bc0ca5f58f38..283e2e607bba 100644
> --- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
> +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
> @@ -27,12 +27,6 @@
>  #include <linux/io.h>
>  #include <linux/pci.h>
>  
> -/*
> - * This variable should be used with the
> - * pci_driver structure initialization.
> - */
> -#define PCI_DEVICE_DATA(__ops)	.driver_data = (kernel_ulong_t)(__ops)
> -
>  /*
>   * PCI driver handlers.
>   */
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index d0961aefdbae..fe060114a647 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -825,6 +825,21 @@ struct pci_driver {
>  	.vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
>  	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
>  
> +/**
> + * PCI_DEVICE_DATA - macro used to describe a specific PCI device in very short form
> + * @vend: the vendor name (without PCI_VENDOR_ID_ prefix)
> + * @dev: the device name (without PCI_DEVICE_ID_<vend>_ prefix)
> + * @data: the driver data to be filled
> + *
> + * This macro is used to create a struct pci_device_id that matches a
> + * specific PCI device.  The subvendor, and subdevice fields will be set
> + * to PCI_ANY_ID.
> + */
> +#define PCI_DEVICE_DATA(vend, dev, data) \
> +	.vendor = PCI_VENDOR_ID_##vend, .device = PCI_DEVICE_ID_##vend##_##dev, \
> +	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0, \
> +	.driver_data = (kernel_ulong_t)(data)
> +
>  enum {
>  	PCI_REASSIGN_ALL_RSRC	= 0x00000001,	/* Ignore firmware setup */
>  	PCI_REASSIGN_ALL_BUS	= 0x00000002,	/* Reassign all bus numbers */
> -- 
> 2.18.0
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux