There are a lot of examples in the kernel where PCI_VDEVICE() is used and still
looks not so convenient due to additional driver_data field attached.
Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest
possible form. For example,
before:
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
(kernel_ulong_t) &dwc3_pci_mrfld_properties, },
after:
{ PCI_VDEVICE(INTEL, INTEL_MRFLD, &dwc3_pci_mrfld_properties },
Drivers can be converted later on in independent way.
While here, remove the unused macro with the same name
from Ralink wireless driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/ralink/rt2x00/rt2x00pci.h | 6 ------
include/linux/pci.h | 15 +++++++++++++++
2 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
index bc0ca5f58f38..283e2e607bba 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h
@@ -27,12 +27,6 @@
#include <linux/io.h>
#include <linux/pci.h>
-/*
- * This variable should be used with the
- * pci_driver structure initialization.
- */
-#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops)
-
/*
* PCI driver handlers.
*/
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d0961aefdbae..754da6f9adb3 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -825,6 +825,21 @@ struct pci_driver {
.vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
+/**
+ * PCI_DEVICE_DATA - macro used to describe a specific PCI device in very short form
+ * @vend: the vendor name (without PCI_VENDOR_ID_ prefix)
+ * @dev: the device name (without PCI_DEVICE_ID_ prefix)
+ * @data: the driver data to be filled
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device. The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_DATA(vend, dev, data) \
+ .vendor = PCI_VENDOR_ID_##vend, .device = PCI_DEVICE_ID_##dev, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0, \
+ .driver_data = (kernel_ulong_t)(data)
+
enum {
PCI_REASSIGN_ALL_RSRC = 0x00000001, /* Ignore firmware setup */
PCI_REASSIGN_ALL_BUS = 0x00000002, /* Reassign all bus numbers */
--
2.18.0
