Am Dienstag, den 24.07.2018, 19:14 +0300 schrieb Leonard Crestez: > This reverts commit 1c86c9dd82f859b474474a7fee0d5195da2c9c1d. > > That commit followed the reference manual but unfortunately the imx7d > manual is incorrect. > > Tested with ath9k pcie card and confirmed internally. > > Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx> Acked-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/imx7d.dtsi | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi > index 7cbc2ffa4b3a..7234e8330a57 100644 > --- a/arch/arm/boot/dts/imx7d.dtsi > +++ b/arch/arm/boot/dts/imx7d.dtsi > @@ -124,14 +124,18 @@ > > num-lanes = <1>; > > interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; > > interrupt-names = "msi"; > > #interrupt-cells = <1>; > > interrupt-map-mask = <0 0 0 0x7>; > > - interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, > > - <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, > > - <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, > > - <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; > > + /* > > + * Reference manual lists pci irqs incorrectly > > + * Real hardware ordering is same as imx6: D+MSI, C, B, A > > + */ > > + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, > > + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, > > + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, > > + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; > > clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, > > <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, > > <&clks IMX7D_PCIE_PHY_ROOT_CLK>; > > clock-names = "pcie", "pcie_bus", "pcie_phy"; > > assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
